HOOKE ROAD BXG.2088-S Discovery Front and Rear Bumper Kit Installation Guide

HOOKE ROAD BXG.2088-S Discovery Front and Rear Bumper Kit

Product Information

• Specifications:
  • Model: BXG.2088-S
  • Contents:
  • 4 Hex Bolt M12*110
  • 6 Hex Bolt M12*35
  • 10 Split Lock Washer M12
  • 14 Flat Washer M12230
  • 4 Hex Nut M12
  • 4 Button Head Socket Cap Bolts Screws M6*16
  • 4 Flat Washer
  • 4 Flange Hex Lock Nuts
  • 1 D-ring M6161 M6
  • 2 Wire
  • 4 Wire Connectors
  • 4 Wire Clips
  • 1 Double-sided tape
  • Tools required:
  • Drive Socket Ratchet Wrench
  • 4mm Hex Bit Socket
  • 10mm, 19mm Shallow Socket
  • Installation time:
  • About 1 hour, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.

Product Usage Instructions

• Step 1: Remove Factory Rear Bumper
  • Prepare to install the new bumper by removing the existing factory rear bumper.
• Step 2: Install Nut Plate Brackets
  • Place the Nut Plate Brackets into the vehicle, ensuring to differentiate between the driver side and passenger side. The driver’s side should be welded with four nuts.
• Step 3: Lift and Position New Bumper
  • Lift the new bumper into the vehicle frame. Secure it using Hex Bolts (M1235), Split Lock Washers (M12), Flat Washers (M122*30), and Hex Nuts (M12). Do not fully tighten these bolts at this stage.
• Step 4: Install D-ring Mount
  • Attach the D-ring mount to the driver side using the specified hardware. Tighten all bolts securely.
• Step 5: Install D-ring
  • Mount the D-ring onto the installed mount.
• Step 6: Finalize Installation
  • Ensure all components are securely fastened. Your installation is now complete. Enjoy your off-road adventures with this Hooke Road product!

FAQs

• Q: What should I do if the product parts in the instruction differ from the actual product contents?
  • A: Minor differences in parts should not affect the installation process. However, if you encounter any significant discrepancies, please contact your distributor for assistance.
• Q: How can I obtain the electronic version of the manual (BXG.2088-S)?
  • A: Scan the provided QR code to access the electronic version of the manual for reference.
• Q: Can I install the bumper with factory bolts instead of the provided hardware?
  • A: Yes, you can choose to use factory bolts for installation if preferred.
• Q: How many people are recommended for the installation process?
  • A: It is recommended to have 2-3 people for the installation, and the process may take about 1 hour depending on mechanical skill level.

Contents

Rear Bumper: BXG.2088-S

HARDWARE

Tools required

• a. Drive Socket Ratchet Wrench;
• b. 4mm Hex Bit Socket;
• c. 10mm, 19mm Shallow Socket;

Installation time

About 1 hour, 2-3 people may be needed. Installation time may differ according to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!) To view the electronic version (BXG.2088-S), please scan the QR code.

Installation instruction

• Step 1: Remove the factory rear bumper, ready to install our bumper.
• Step 2: Put the Nut Plate Brackets into the vehicle. Notes: the driver side and passenger side, the driver side is welded with four nuts.
• Step 5: Lift up the bumper into the vehicle frame. Install thebumperwiththeHex Bolt (M1235), Split Lock Washer (D12), Flat Washer (M122*30), HexNut(M12). Don’t tighten up those bolts. (Can also be installed with factory bolts)
• Step 6: Install the D-ring mount into the driver side withtheHexBolt(M1235), Split Lock Washer (D12), Flat Washer (M122*30), HexNut(M12). Tighten up all of the bolts.
• Step 7: Install the D-ring.
• Step 8: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention:

1. The product parts in this instruction may differ slightly from the actual product contents but generally do not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of questions about your purchase.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>