HOOKE ROAD BXG.9902-S High Overland Bed Rack Installation Guide

HOOKE ROAD BXG.9902-S High Overland Bed Rack

Specifications

• Product: Bed Rack

• Model: BXG.9902-S

• Contents:

  • 1 Bed Rack Assembly
  • 92 Flat Washer M10201.5
  • 12 Button Head Socket Cap Bolts Screws M10*25
  • 80 Flange Hex Lock Nuts M10
  • 80 Button Head Socket Cap Bolts Screws M10*20

• Tools required: 6mm Hex Bit Socket, Drive Socket Ratchet
  Wrench

• Installation time: About 1.5 hours, 1-2 people may be
  needed

Product Usage Instructions

1. Step 1: Assemble the Leg Section (H6) &
   the Top Brace (H3) using Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5), Flange Hex Lock Nuts (M10).

2. Step 2: Mount the Top Brace (H1) using the provided hardware.

3. Step 3: Mount the Top Brace (H2) with the specified bolts and nuts.

4. Step 4: Install the Leg Cross member (H7) securely.

5. Step 5: Attach the Side Panel (H4) using the provided screws, washers, and nuts.

6. Step 6: Fix the bed rack into your vehicle by installing the Clamp Assembly (H5) into the trail rail.

7. Step 7: Your installation is complete. Enjoy your off-road adventures with the Hooke Road product!

Attention:

• The actual product parts may slightly differ from those in the manual but should not impact installation.
• Contact your distributor for any questions regarding your purchase.

FAQ

Q: How can I adjust the length and width of the bed rack?

A: To adjust, stretch the Leg Section (H6) & the Side Panel (H4) as shown in the picture.

Q: What if I have questions about my purchase?

A: Feel free to contact your distributor for any queries regarding your purchase.

Contents

Tools required

1. 6mm Hex Bit Socket;
2. Drive Socket Ratchet Wrench；

Installation time:

• About 1.5 hours, 1-2 people may be needed. Installation time may differ according to your mechanical skill level.
  (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS

• CAREFULLY BEFORE STARTING INSTALLATION!)

• To view the electronic version (BXG.9902-S), please scan the QR code.

Installation instruction:

• Step 1: Assemble the Leg Section (H6) & the Top Brace (H3). For this, use the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5), Flange Hex Lock Nuts (M10) .

• Step 2: Next, mount the Top Brace (H1). To do this, use the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5), Flange Hex Lock Nuts (M10) .

• Step 3: Mount the Top Brace (H2). Use the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5), Flange Hex Lock Nuts (M10).

• Step 4: Mount the Leg Cross member (H7). Use the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5), Flange Hex Lock Nuts (M10).

• Step 5: Mount the Side Panel (H4). Use the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5), Flange Hex Lock Nuts (M10).

• Notes: If you want to adjust the length and width of the bed rack, please stretch the Leg Section (H6) & the Side Panel (H4). As the picture shown.

• Step 6: Fixed the bed rack into your vehicle. Install the Clamp Assembly (H5) into the trail rail with the Button Head Socket Cap Bolts Screws (M1020), Flat Washer (M1020*1.5).

• Step 7:
  The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention

1. The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of question about your purchase.

GOOGLE Hooke Road to find your parts

Post Your Jeep/Truck
w/Hashtag #hookeroad to Win Discount Every Week

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>