tp-link Omada Pro Gigabit VPN Router Owner’s Manual

tp-link Omada Pro Gigabit VPN Router

Product Information

The product is the Omada Pro Router, manufactured by TP-Link. It is a Class A product that does not come with a power adapter. The router is compliant with FCC part 15 technical standards and has been approved by TP-Link USA Corporation.

The product is also compliant with the essential requirements and provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU,  and (EU)2015/863, as well as the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations2016. It bears the CE Mark and UKCA Mark, indicating compliance with European Union regulations.

The product is also compliant with Industry Canada Statement (CAN ICES-3 (A)/NMB-3(A)) and BSMI Notice requirements. It conforms to safety standards and does not contain hazardous substances like Pb, Hg, Cd, Cr+6, PBB, PBDE, or PCB above the specified limits.

For more information on regulatory compliance, visit TP-Link’s website at https://www.tp-link.com/us/ (for FCC compliance) and https://www.tp- link.com/en/support/ce/ (for EU declaration of conformity).

Product Usage Instructions

Follow these instructions for proper usage of the Omada Pro Router:

1. Keep the device away from water, fire, humidity, or hot environments.
2. Do not attempt to disassemble, repair, or modify the device. If you need service, please contact TP-Link.
3. Place the device with its bottom surface downward.
4. Plug the product into wall outlets with earthing connection through the power supply cord.

Note: The above caution applies specifically to G611 model.

Refer to the product label located at the bottom of the device for explanations of the symbols. Symbols may vary between products but can include information such as equipment class, AC/DC power, indoor use only, dangerous voltage, risk of electric shock, energy efficiency marking, protective earth, frame or chassis, hot surface caution, operator’s manual, stand-by, ON/OFF button, and fuse usage.

When disposing of the product, it should be handled according to European directive 2012/19/EU for waste electrical and electronic equipment (WEEE). Users have the option to give the product to a competent recycling organization or return it to the retailer when purchasing new electrical or electronic equipment.

FCC Compliance Information Statement

For Class A product with no power adapter

• Product Name: Router
• Model Number: G611
• Responsible party:
• TP-Link USA Corporation
• Address: 10 Mauchly, Irvine, CA 92618
• Website: https://www.tp-link.com/us/
• Tel: +1 626 333 0234
• Fax: +1 909 527 6804
• E‑mail: sales.usa@tp‑link.com.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
   Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• Product Name: Omada Hardware Controller
  Model Number: OC300

• Responsible party:

• TP-Link USA Corporation

• Address: 10 Mauchly, Irvine, CA 92618

• Website: https://www.tp-link.com/us/

• Tel: +1 626 333 0234

• Fax: +1 909 527 6804

• E‑mail: sales.usa@tp‑link.com

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.
  Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

We, TP‑Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2023/7/18

CE Mark Warning

This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
EU Declaration of Conformity
TP‑Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/

UK Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK declaration of conformity may be found at https://www .tp-link.com/support/ukca/
Canadian Compliance Statement
This device contains licence‑exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence‑exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Industry Canada Statement

CAN ICES‑3 (A)/NMB‑3(A)

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Place the device with its bottom surface downward.
• Plug the product into the wall outlets with earthing connection through the power supply cord.
• The operating temperature for the device shall be within 0˚C to 40˚C (32˚F to 104˚F).
  Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product withcare and operate at your own risk .

Explanations of the symbols on the product label
Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.

For indoor use only

|

Dangerous voltage

| Caution, risk of electric shock
|

Energy efficiency Marking

| Protective earth
| Earth
---|---
| Frame or chassis
| Functional earthing
| Caution, hot surface
| Caution
| Operator’s manual
|

Stand-by

|

“ON”/”OFF” (push-push)

| Fuse
| Fuse is used in neutral N

| RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

|

Caution, avoid listening at high volume levels for long periods

|

Disconnection, all power plugs

m| Switch of mini-gap construction

For Class B product with power adapter

FCC Compliance Information Statement.

• Product Name: Router
• Model Number: G36

Responsible party:
TP-Link USA Corporation

• Address: 10 Mauchly, Irvine, CA 92618
• Website: https://www.tp-link.com/us/
• Tel: +1 626 333 0234
• Fax: +1 909 527 6804
• E‑mail: sales.usa@tp‑link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Product Name: Power Adapter

• Model Number: T120100-2B1
• Responsible party:
• TP-Link USA Corporation
• Address: 10 Mauchly, Irvine, CA 92618
• Website: https://www.tp-link.com/us/
• Tel: +1 626 333 0234
• Fax: +1 909 527 6804
• E‑mail: sales.usa@tp‑link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP‑Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2023/7/18

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

EU Declaration of Conformity
TP‑Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp- link.com/en/support/ce/

UK Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and ElectricalEquipment (Safety) Regulations 2016.
The original UK declaration of conformity may be found at https://www.tp- link.com/support/ukca/

Canadian Compliance Statement
This device contains licence‑exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence‑exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Industry Canada Statement

CAN ICES‑3 (B)/NMB‑3(B)

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Adapter shall be installed near the equipment and shall be easily accessible.
• Place the device with its bottom surface downward.
• Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
• The operating temperature for the device shall be within 0˚C to 40˚C (32˚F to 104˚F). Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanations of the symbols on the product label
Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.

For indoor use only

|

Dangerous voltage

| Caution, risk of electric shock
|

Energy efficiency Marking

| Protective earth
| Earth
---|---
| Frame or chassis
| Functional earthing
| Caution, hot surface
| Caution
| Operator’s manual
|

Stand-by

|

“ON”/”OFF” (push-push)

| Fuse
| Fuse is used in neutral N

| RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

|

Caution, avoid listening at high volume levels for long periods

|

Disconnection, all power plugs

m| Switch of mini-gap construction

References

• Link: Simple, secure one-click payments
• CE Regulatory Compliance | TP-Link
• Regulatory Compliance | TP-Link
• WiFi Networking Equipment for Home & Business | TP-Link

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>