Dolby Nova S80 5.1.2 Channel Atmos Soundbar User Manual

Dolby Nova S80 5.1.2 Channel Atmos Soundbar

Product Information

Specifications

• Compliance: FCC radiation exposure limits
• Environment: Uncontrolled
• Minimum Distance: 20cm between the radiator and the body
• Co-location: Not to be operated with any other antenna or transmitter

Product Usage Instructions

Installation

1. Select an appropriate location for the equipment installation.
2. Ensure there is a minimum distance of 20cm between the radiator and your body.
3. Place the equipment in the desired location, taking into consideration any necessary connections or mounting requirements.
4. Securely attach the equipment following the manufacturer’s instructions.

Operation

1. Ensure that the equipment is properly installed according to the installation instructions.
2. Power on the equipment using the designated power source.
3. Follow the specific operating instructions provided by the manufacturer for any additional functionality or features.
4. Monitor the equipment during operation to ensure it functions correctly.

Maintenance

1. Regularly inspect the equipment for any signs of damage or wear.
2. Clean the equipment using a soft, dry cloth to remove any dust or debris.
3. Avoid using any harsh chemicals or solvents that may damage the equipment.
4. If any issues or malfunctions occur, refer to the troubleshooting section of the user manual or contact customer support for assistance.

FAQ

• Q: What are the FCC radiation exposure limits?
  A: The FCC sets specific limits on the amount of radiation emitted by electronic equipment to ensure user safety. This product complies with those limits.

• Q: Can I use this equipment in a controlled environment?
  A: No, this equipment is designed to be used in an uncontrolled environment.

• Q: Can I operate this equipment alongside other antennas or transmitters?
  A: No, this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

support@ultimea.com
support.ultimea.com

• +1 888-598-8875   (US) Mon-Fri 9am-5pm (PST)
• +49 89-628-25828 (EU) Mon-Fri 9am-5pm (CET)

ACCESSORIES LIST

SOUNDBAR CONTROLS

Control Panel

1. : Power Button
   Press to power on / Hold for 3 seconds to power off.

2. : Input Mode
   Press to switch channels: eARC-HD IN (HDMI IN)­OPT (OPTICAL)-BT-AUX-USB.

3. : BT
   Press to switch to Bluetooth channel and enter pairing mode. Hold for 3 seconds to disconnect the current device and connect to a new device manually on your mobile phone/ PC/ TV (BT ID: Nova S70).

4. ”  “: Volume Down

5. 0 “ “:Volume Up

Remote Control

SOUNDBAR INSTALLATION

Assembly Steps

1. Step 1
   Set the two parts of the Soundbar on the same level and align the connection joints. Connect the two parts by pushing parallelly to combine as one piece.

2. Step2
   Plug in 6pin Cable.

CONNECT TO TV VIA HDMI OUT eARC / ARC

1. Step 1:
   Connect one end of the HDMI cable to the eARC / ARC port on the back of your TV.

2. Step 2:
   Then connect the other end into the HDMI OUT (eARC) port of the soundbar.

3. Step 3:
   Press “eARC” button on the remote control to select “HDMI OUT (eARC)” input .

Note
Make sure your TV HDMI supports eARC, otherwise the Dolby Atmos audio signal cannot be transmitted.

• Atmos: If you are watching a movie in the Dolby Atmos format, please set the audio output on your TV to Pass Through
  TV Settings > Home > Settings > Sound > Digital Audio Output> Pass Through

• DTS: If you are watching a movie in the DTS format, please set the audio output on your TV to PCM
  TV Settings > Home > Settings > Sound > Digital Audio Output> PCM

What’s the difference between: HDMI IN, HDMI ARC, HDMI eARC?

• HDMI IN is a standard HDMI input that allows you to connect devices to your TV or audio system. It supports audio and video signals, but it does not support audio return channel (ARC) or enhanced audio return channel (eARC) functionality.
• HDMI ARC is a special HDMI port that supports two-way communication between your TV and audio system. This means that audio can be sent from your TV to your audio system, and audio system can send audio back to your TV.
• HDMI eARC (Enhanced Audio Return Channel) is an updated version of HDMI ARC that supports higher quality audio formats such as Dolby Atmos and DTS:X.

Note: Please turn on the “CEC” function on your TV.

When eARC / ARC is connected, your TV remote control can control the soundbar and TV simultaneously

1. Turn on/ off
2. Adjust the volume

CONNECT TO OTHER DEVICE VIA HDMI IN

1. Step 1: Connect the HDMI Cable to the HDMI OUT (eARC) port on the Soundbar and the other end to the eARC / ARC port on the TV.
2. Step 2: Connect the HDMI cable to the HDMI OUT port on the other device (Such as DVD or game consul) and the other end to HDMI IN port on the Soundbar.
3. Step 3: Press “  ” button on Soundbar or Remote Control to switch to HDMI IN channel.

Note: Your TV HDMI needs to support eARC to transmit the Dolby Atmos audio format to your Soundbar.

CONNECT TO TV VIA OPTICAL I AUX

OPTION 1: OPTICAL

1. Make sure the cable is connected to OPTICAL OUT port on your TV, and the other end to OPTICAL port on the Soundbar.
2. Make sure the optical plug is inserted correctly as it  shows in the picture. Do not insert the plug upside down  and break the optical.

Note: If audio is coming from the internal TV speakers,

OPTION 2: AUX

1. Connect the 3.5mm to RCA audio cable to connect to your TV’s RCA AUDIO OUT port.
2. Make sure the color of the cables ends matches the color of the TV ports.
   Note: Please remember to unplug the AUX cable from TV and Soundbar when you want to switch other mode.

In Optical Mode: If there is no sound, try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM

CONNECT TO BLUETOOTH®

1. Press the    button on the soundbar or remote control to enter Bluetooth pairing mode.
2. Open your phone’s Bluetooth settings, find and select “Nova 570” to connect the soundbar.
   Note: If it’s already in the Bluetooth mode and connected, press and hold ” ” button for 3 seconds to disconnect current device and connect to new device manually on your mobile phone/ PC / TV.

CONNECT TO SUBWOOFER AND SURROUND SPEAKERS

1. Use the 6m RCA-RCA cables to connect the subwoofer and surround speakers, please pay attention to match the same color interfaces on the surround speakers with the corresponding ones on the subwoofer and place the surround speakers accordingly
2. Use power cable to connect your subwoofer and power port.

PAIRING SUBWOOFER

The subwoofer has been paired with the soundbar by ULTIMEA. If there is no sound coming from the subwoofer, you need to re-pair the Soundbar with the subwoofer.

1. Step 1 Press and hold the “assy” button on the remote control for 5 seconds, the display will show “5UB” flashing.
2. Step 2 Press and hold the PAIR button on subwoofer for 5 seconds, the white LED will be fast flashing. The white LED will be always on when the subwoofer is paired successfully.

PLACEMENT OPTIONS

1. For a better listening experience, please choose one of the two placement options shown in the illustration above based on your home environment.
2.  The soundbar and surround speakers should be placed at or near ear level.

WALL MOUNT INSTALLATION

Note: Please use the HDMI Adaptor for easy plugging and unplugging of the HDMI Cable.

SPECIFICATIONS

2 (upward-firing Driver) + (3.1″ x 1.2″) x 2 (Surround Speaker)+ 8″ (Subwoofer)
Frequency Response| 35Hz- 18kHz
Standby Power| < 0.5W
Operating Temperature| o·c – 45•c , 32 ° F – 113 ° F
Bluetooth Version| 5.3
Dimensions and Weight

Soundbar| 800(W) x 38(H) x 90(D)mm| 31.5″ X 1.5″ X 3.5″
Subwoofer| 315(W) x 385(H) x 190(D)mm| 12.4″ X 15.2″ X 7.5″
Surround Speaker| 150(W) x 38(H) x 82(D)mm| 5.9″ X 1.5″ X 3.2″
Packaging| 472(W) x 306(H) x 430(D)mm| 15.6″ X 12″ X 16.9″
Net Weight| 6.7kg / 14.77Ibs
Gross Weight| 8.94kg / 19.71Ibs

SAFETY INSTRUCTIONS

Please read this user manual carefully and save it for future reference. Do not make unauthorized alterations to the product, doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.

• Avoid dropping.
• Do not disassemble.
• Do not submerge in water
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not place dangerous items on top of this device (e.g. liquid filled objects, lit candles). Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
• To avoid hearing damage, do not listen for extended periods at high volume.
• Do not expose the batteries to extreme heat sources such as direct sunlight or open flames.
• The ideal operating temperature for this product and its accessories is between 41°F/5°C and 95°F/35°C.
• The adapter should be installed near the device and should be easily accessible.
• Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.

PROPER DISPOSAL INSTRUCTIONS
This mark shown on the product or its packaging, indicates that this product should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Waste Electrical & Electronic Equipment
Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC REGULATORY COMPLIANCE

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio / TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED WARNINGS
This device contains licence-exempt transmitter (s) / receiver (s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS (s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and ompliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Declaration of Conformity

• We (Manufacturer is responsible for this declaration)
• Dynanic (Shenzhen) Technology Limited (Company name)
• 20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District Shenzhen, China 518000 (Company address)
• Declare under our sole responsibility that the product
• Trade Mark: UL TIMEA
• Product Name: Nova S70 3.1.2 Channel Dolby Atmos Soundbar
• Model No.: U3920
• To which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to RED Directive (2014/53/EU) & RoHS (2011/ 65/ EU) product is responsible to affix CE marking, the following standards were applied:
  • EN 55032:2015/A 11 :2020
  • EN 55035:2017/A11:2020
  • ENIEC 61000-3-2:2021
  • EN 61000-3-3:2013/A 1 :2021 ETSIEN 301 489-1 V2.2.3(2019-11) ETSIEN 301 489-17 V3.2.4(2020-09) EN 300 328 V2.2.2(2019-07)
  • EN 50663:2017
  • ENIEC 62368-1 :2020+A 11 :2020 IEC62321-3-1:2013
  • EC 62321-4:2013+A1:2017
  • EC 62321-5:2013
  • EC 62321-6:2015
  • EC 62321-7-1:2015
  • EC 62321-7-2:2017
  • EC 62321-8:2017
• Full Name: Yoyo.Yu
• Position: Approbation Manager Signature:
• Place/Date: Shenzhen, China/Dec. 25-2022

Trade Marks:

• Dolby Atmos
  • Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright© 1992-2021 Dolby Laboratories. All rights reserved.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Soundlab Technology Co.,Ltd. is under license. Other trademarks and trade names are those of their respective owners
• The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other.

Nova S70 3.1.2 Channel Dolby Atmos Soundbar Model No.: U3920

• EC I REPI Dynanic GmbH
• Buchenring 57, 22359 Hamburg, Germany
• UK I REPI UK Crossborder limited
• 7 Bell Yard London WC2A 2JR, UK United Kingdom
• Made in China
• Manufacturer: Dynanic (Shenzhen) Technology Limited Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District, Shenzhen, China 518000

If you need our support, kindly reach out to our service team. We are always glad to help.

• +1 888-598-8875 (US)
  • Mon-Fri 9am-5pm (PST)
• +49 ­89-628-25828 (EU)
  • Mon-Fri 9am-5pm (CET)
• support@ultimea.com
• support@·ult1mea.de
• support.ultimea.com
• support.ultimea.de

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>