Apple A1523 AirPods with Charging Case User Guide
- June 12, 2024
- Apple
Table of Contents
A1523 AirPods with Charging Case
User Guide
A1523 AirPods with Charging Case
To connect to iPhone with iOS 10 or later, follow steps 1–3.
For all other devices see the back of this guide.
-
Turn on Bluetooth®.
Swipe up from the bottom of the screen and tap the Bluetooth icon.
-
Connect AirPods.
Open case, hold near unlocked iPhone, then follow onscreen instructions. -
Start listening.
Place in ears and adjust until you hear the tone. AirPods are ready to play.
Use with your other Apple devices.
AirPods now work with your other devices signed in to iCloud. Select AirPods in Control Center (iOS) or menu bar (macOS).
Connect to other devices.
With AirPods in case and lid open, press button until light blinks. Then go to Bluetooth settings and choose AirPods. Double-tap for Siri.
On either Air Pod, double-tap above the stem to activate Siri or answer a call.
Fully charged
Check charge status.
Light shows charge status of AirPods when they’re in the case. Otherwise, light shows charge status of the case.
Not fully charged
Charge.
AirPods charge while in the case.
TM and © 2016 Apple Inc. All rights reserved.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and are used under license. IOS is a trademark of Cisco
and is used under license. Designed by Apple in California. Printed in XXXX.
AM034-01398-A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>