HOOKE ROAD BXG.2077-S Front Bumper Installation Guide

Table of Contents

Specifications:

Product Name: Front Bumper
Model Number: BXG.2077-S
Installation Time: About 1.5 hours
Tools Required:
1. Drive Socket Ratchet Wrench
2. 5mm Hex Bit Socket
3. 19mm Wrench
4. 19mm Shallow Socket

Step 1 : Remove Existing Front Bumper
Remove the front bumper from your vehicle to prepare for the installation of the new bumper.
Step 2: Attach Decorative Plates
Peel off the double-sided tape and stick the decorative plates (red or white) onto the bumper. Customize the color if desired.
Step 3: Install Bull Bar
Use Hex Bolt (M820), Split Lock Washer (D8), Flat Washer (M820*1), and Flange Hex Lock Nuts (M8) to install the bull bar.
Step 4: Install Winch Bracket
Place winch bracket (B) into the frame using M12*110 bolts, split lock washer, flat washer, and flange hex lock nuts. Do not fully tighten these bolts yet.
Step 5: Attach Winch Bracket (A)
Attach winch bracket (A) to bracket (B) using Button Head Socket Cap Bolts Screws (M816), Flat Washer (M820*1), and Flange Hex Lock Nuts (M8). Tighten the step 4 bolts.
Step 6: Install Bumper
Lift the bumper and install it with the provided bolts and nuts. Use Hex bolts (M1235), Split Lock Washer (D12), Flat Washer (M12302) for upper inside holes, and Split Lock Washer (D12), Flat Washer (M1230*2), Hex Nuts (M12) for other holes. Tighten all bolts securely.
Step 7: Completion
Your installation is complete! Enjoy your off-road adventures with the new Hooke Road front bumper.

Attention:

The product parts may differ slightly from what is shown but won’t affect installation.
Contact your distributor for any questions regarding your purchase.

Frequently Asked Questions:

Q: Can I paint the decorative plates?
A: Yes, you can customize the color of the decorative plates using paint.
Q: How many people are recommended for installation?
A: It is recommended to have 2-3 people for the installation process.

About 1.5 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.2077-S), please scan the QR code.

Step 1: Remove the front bumper, ready to install our product. As the picture shown.
Step 2: Peel off the double-sided tape provided, and then stick the decorative plate onto it. We have provided red and white ones, so you can choose according to your needs. You can use paint to customize the decorative pieces and change their color. It is recommended to use white decorative pieces for better color transformation.
Step 3: Install the bull bar with the Hex Bolt (M820), Split Lock Washer (D8), Flat Washer (M820*1), Flange Hex Lock Nuts (M8).
Step 4: Pick up the winch bracket (B) and place it into the frame, aligning both sides with the frame holes. Install the M12*110 bolts, split lock washer, flat washer and flange hex lock nuts. Don’t tighten up those bolts.
Step 5: Install the winch bracket (A) into the winch bracket (B) with the Button Head Socket Cap Bolts Screws (M816), Flat Washer (M820*1), Flange Hex Lock Nuts (M8). Aligning the winch bracketc(a) with the frame holes. Tighten up the step 4 bolts.
Step 6: Lift up the bumper. Install it into your vehicle with the 6 bolts or nuts. The upper of inside holes with the Hex bolts (M1235), Split Lock Washer (D12), Flat Washer (M12302), the others holes with the Split Lock Washer (D12), Flat Washer (M1230*2), Hex Nuts (M12). Tighten up those bolts.
Step 7:
The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention:

The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
Please feel free to contact your distributor if you have any kind of question about your purchase.

HOOKE-ROAD-BXG.2077-S-Front-Bumper-fig-12