HOOKE ROAD BXG.3044-S Wrangler and Gladiator Front Bumper Plate and LED Lights Instruction Manual
- May 15, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG.3044-S Wrangler and Gladiator Front Bumper Plate and LED
Lights
Specifications
- Model: BXG.3044-S
- Parts Included:
- 6 x Hex Bolt M12*35
- 4 x Hex Bolt M8*20
- 4 x Button Head Socket Cap Bolts Screw M8*16
- 10 x Split Lock Washer D12
- 4 x Split Lock Washer D8
- 10 x Flat Washer M12302
- 4 x Flat Washer M8201
- 4 x Flat Washer M8
- 4 x Hex Nut M12
- 4 x Flange Hex Lock Nuts M12
- 4 x Flange Hex Lock Nuts M8
- 2 x Red Decorative Plates
- 2 x White Decorative Plates
FAQ
- Q: Can I paint the decorative plates?
- A: Yes, you can customize the colour of the decorative plates using paint. It is recommended to use white decorative plates for better colour transformation.
- Q: How many people are recommended for installation?
- A: It is recommended to have 2-3 people for installation due to the size and weight of the bumper.
- Q: Are all tools required for installation included?
- A: The tools required (Drive Socket Ratchet Wrench, 5mm Hex Bit Socket, 13mm & 19mm Wrench) are not typically included and must be provided separately.
- Q: Can I install this bumper alone?
- A: While possible, it is recommended to have assistance due to the size and weight of the bumper for a smoother installation process.
WHAT IN THE BOX
Front Bumper BXG.3044-S
PARTS
Tools required
- Drive Socket Ratchet Wrench;
- 5mm Hex Bit Socket;
- 13mm & 19mm Wrench;
Installation time
- About 1.5 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
- (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
- To view the electronic version (BXG.3044-S), please scan the QR code.
Installation instruction
- Step 1: Remove the front bumper, ready to install our product. As the picture shows.
- Step 2: Peel off the double-sided tape provided, and then stick the decorative plate onto it. We have provided red and white ones, so you can choose according to your needs. You can use paint to customize the decorative pieces and change their color. It is recommended to use white decorative pieces for better color transformation.
- Step 3: Install the bull bar with the Hex Bolt (M820), Split Lock Washer (D8), Flat Washer (M820*1), Flange Hex Lock Nuts (M8).
- Step 4: Install the winch bracket with the Hex Bolt (M1235), Split Lock Washer (D12), Flat Washer (M1230*2), Flange Hex Lock Nuts (M12).
- Step 5: Lift the bumper and prepare to install it onto the car. Place an M12 nut with a washer on the outer side, and an M12 nut with a washer on the inner side. Install an M12 screw with a washer on the upper inner side. Finally, use an M8 screw with a washer to connect the winch and bumper.
- Step 6: Install the D-rings.
- Step 7: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!
Attention
- The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of question about your purchase.
Read User Manual Online (PDF format)
Loading......