HOOKE ROAD BXG.4210-S 16-23 Tacoma Front Winch Bumper w Skid Plate & LED Lights User Manual

HOOKE ROAD BXG.4210-S 16-23 Tacoma Front Winch Bumper w Skid Plate & LED

Lights

Product Specifications:

• Model: BXG.4210-S
• Contents:
  • 7 Button Head Socket Cap Bolts Screws – M8*20
  • 8 Hex Bolts – M12*30
  • 6 Button Head Socket Cap Bolts Screws – M10*20
  • 6 Hex Bolts – M10*30
  • 6 Hex Bolts – M12*110
  • 2 Button Head Socket Cap Bolts Screws – M6*16
  • 14 Split Lock Washer – D12
  • 6 Split Lock Washer – D10
  • 7 Flat Washer – M8201
  • 6 Flat Washer – M10201.5
  • 6 Flat Washer – M10252
  • 2 Flat Washer – M6161
  • 24 Flat Washer – M12252
  • 10 Hex Nut – M12
  • 2 Flange Hex Lock Nuts – M8
  • 2 Flange Hex Lock Nuts – M6
  • 6 Flange Hex Lock Nuts – M10
  • 2 EVA

Product Usage Instructions

Tools Required:

• Drive Socket Ratchet Wrench
• 4mm & 5mm Hex Bit Socket
• 10mm, 13mm, 17mm, 19mm Wrench
• Masking Tape
• Level Self Leveling
• Cutting Machine

Installation Time:

About 2 hours, with 2-3 people recommended. Installation time may vary based on mechanical skill level.

Please verify all parts are present and read instructions carefully before starting installation!
To view the electronic version (BXG.4210-S), please scan the QR code.

Installation Instructions:

Cutting The Factory Bumper:

1. Cut the bumper using the chosen tool following the marked positions.
2. Clean up any debris and refine the cut edges for a neat appearance.

Cutting The Factory Fender Flares:

1. Mark off the line using masking tape and cut off the excess fender flares.

Cutting The Factory Inner Fender Liners:

1. (Instructions for cutting the factory inner fender liners)

Install The Bumper:

1. 1. Stick the EVA into the main body and assemble the wings using specified bolts and washers.

Frequently Asked Questions (FAQ):

Q: How long does it take to install the front bumper?
A: The installation time is approximately 2 hours, with 2-3 people recommended. However, it may vary based on mechanical skill level.

Package Content

Parts

Tools required

• Drive Socket Ratchet Wrench;
• 4mm & 5mm Hex Bit Socket;
• 10mm , 13mm, 17mm, 19mm Wrench;
• Masking Tape;
• Level Self Leveling;
• Cutting Machine;

Installation time

• About 2 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
  (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)

• To view the electronic version (BXG.4210-S), please scan the QR code.

Installation instruction

Cutting The Factory Bumper

• Step 1: Ready to cut the factory bumper. It is strongly recommended to find a professional for cutting operations.

• Step 2: Take safety precautions: Ensure the vehicle is parked in a safe location and wear appropriate safety goggles and gloves during the cutting process. If possible, operate outdoors or in a well-ventilated area.

• Step 3: Positioning and marking. Mark the centre position of the installation holes in the inner fender liners, as shown in the following image. Once you have located the position, use masking tape to mark it on both sides. Ensure the tape is applied horizontally, and it is recommended to use a level of self-levelling to assist with the marking and positioning.

• Step 4: Cut the bumper: Carefully cut the bumper using the chosen tool, following the marked positions. Exercise caution to avoid accidental damage or injury, and follow proper cutting techniques.
  Finishing and refinement: After completing the cut, clean up any debris and refine the cut edges to achieve a neat and smooth appearance
  Cutting The Factory Fender Flares:

• Step 5: After cutting the bumper, you are going to notice your factory fender here now goes over you don’t want that so that is the only thing you are going to have to cut off. Getting some masking tape to kind of mark off the line and cutting them.
  Cutting The Factory Inner Fender Liners:

• Step 6: When cutting the original front bumper, you have cancelled the connection buckle between the bumper and the inner fender liners. At this step, you will find that the front part of the original inner fender liners cannot be fixed. We strongly recommend that you cut off the excess part of the front part to keep the whole Beautiful. If you want to maintain the stability of the liner as much as possible, cut the liner while keeping the screw positions intact(Pictures 1 & 2). If aesthetics are a priority, directly cut the liner flush with our bumper edge (Picture 3).
  Install The Bumper:

• Step 7: Stick the EVA into the main body. To assemble the wings & the main body. Use the hex bolts (M1030), split lock washer (D10), flat washer (M1025*2). Tighten up those bolts.

• Step 8: To install the bull bar. Use the button head socket cap bolt screws (M1020), flat washer (M1020*1.5), and Flange Hex Lock Nuts (M10). Tighten up those bolts.

• Step 9: To install the mounting brackets. Use the Hex Bolts (M12100), Split Lock Washer(D12), flat washer (M1225*2), and Hex Nuts (M12). Don’t tighten up those bolts.

• Step 10: To install the winch bracket. Use the Hex Bolts (M1230), Split Lock Washer(D12), flat washer (M1225*2). Tighten up those bolts.

• Step 11: To install the license plate bracket. Use the button head socket cap bolt screws (M820), flat washer (M820*1), and Flange Hex Lock Nuts (M8). Tighten up those bolts.

• Step 12: Lift up the bumper into your vehicle. Install it with the factory bolts.
  Keep the bolts loose, raise the bumper, adjust the gap between it and the car, and then tighten the bolts (the step & the step 10) after confirming that the desired effect is achieved

• Step 13: To install the skid plate & the skid plate bracket. Use the M8 button head socket cap bolt screws groups & the M12 hex bolt groups. Tighten up those bolts.

• Step 14: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention:

1. The product parts in this instruction may differ slightly from the actual product contents but generally do not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of questions about your purchase.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>