HOOKE ROAD BXG.8004-1 Rear Bumper Installation Guide
- May 15, 2024
- HOOKE ROAD
Table of Contents
MAKE A DIFFERENGE
RearBumper
BXG.8004-1
BXG.8004-1 Rear Bumper
(1)Contents:
| Qty | Part Name | Size(mm) | Picture |
|---|---|---|---|
| 6 | Hex Bolt | M1290 | |
| 6 | Hex Bolt | M10*35 | |
| 6 | Split Lock Washer | D12 | |
| 6 | Split Lock Washer | D10 | |
| 12 | Flat Washer | M12302 | |
| 12 | Flat Washer | M10201 | |
| 6 | Hex Nut | M12 | |
| 6 | Hex Nut | M10 |
Toots required:
a. 19mm Wrench;
b. Drive Socket Ratchet Wrench;
c. 19mm Shallow Socket;
d. 4mm Hex Bit Socket;
Installation time:
About 40 minutes, 1-2 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION!)
To view the electronic version (BXG.8004-1), please scan the QR code.
https://drive.google.com/drive/folders/1oRTs-
EZG_zbZ4Piyni7jSztaSQpr7HqJ?usp=share_link
Installation instruction:
Step 1: Remove the factory rear bumper, ready to install our bumper.
Step
2: Assemble the wings & the main body with the Hex Bolt (M1230), Split Lock
Washer (D12), Flat Washer (M1230*2), Hex Nut (M12).
Step 3: Install the bumper into the vehicle frame with the Hex Bolt
(M1035), Split Lock Washer (D10), Flat Washer (M1020*1), Hex Nut
(M10).
Step
4: Keep the bolts loose, raise the bumper, adjust the gap between it and the
car, and then tighten the bolts after confirming that the desired effect is
achieved.
Step 5:
The installation is complete. We hope you enjoy a wonderful off-road life
with this quality Hooke Road product!
Attention:
- The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of question about your purchase.
Hooke Road to find your parts
@HookeRoad4x4
Post Your Jeep/Truck
w/Hashtag #hookeroad to Win Discount Every Week