ezviz Bullet Cloud Camera User Guide

ezviz Bullet Cloud Camera User Guide

Operations

Power-on

Option 1 Power on the camera by connecting to the power socket by a power cable.
Option 2 You can also power on the camera (only for the PoE model) by PoE switch (not included).

Camera Setup

1. Create an user account

   • Connect your mobile phone to Wi-Fi.
   • Download and install the EZVIZ app by searching “EZVIZ” in App Store and Google PlayTM
   • Launch the app and register for an EZVIZ user account following the start-up wizard.

2. Add a camera to EZVIZ

   • Log in the EZVIZ app.

   • From the Home screen, tap “+” on the upper-right corner to go to the scan QR code interface.
     

   • Scan the QR Code on the bottom of the camera and then configure the Wi-Fi.
     The wired network connection is supported as well, connect the camera to the router with a network cable.
     

   • Enter the correct time zone and DST information and then finish the setup.

Installing the Camera

• Make sure the wall is strong enough to withstand three times the weight of the camera and the mounting.
• If the wall is cement, you need to insert expansion screws before you install the camera.
• If the wall is wooden, you can use self-tapping screw to secure the camera.

The camera can be installed on the wall or ceiling. Installing on the wall will be taken as the example in the following content.

1. Sticking Mounting Template
   Stick the mounting template to the place to install the camera and drill the screw holes according to the mouting template.

2. Installing the Camera
   Route the camera cables through the mounting base and wire the cables through the side opening.
   Fix the mounting base to the wall with the supplied screws.
   

3. Connecting Cables
   Connect the power cable and network cable.
   Add the camera to your EZVIZ account. If the camera is added before, it will connect to the same account automatically after connecting the power and network cables.
   If the camera is connected to a Wi-Fi network before, it will connect to the same Wi-Fi automatically after connecting the power cable.

4. Adjusting the Surveillance Angle

   • Loosen the adjusting screw and adjusting knob.
   • Adjust the surveillance angle to your desired place.
   • Tighten the adjusting screw and adjusting knob after finishing.
     

Make sure the microSD card slot facing downward for water-proof performance when you adjust the camera surveillance angle.

Appendix

Box Content

• Cloud Camera x1

• Power Adapter x1

• Mounting Template x1

• Screw Kit x1

• Quick Start Guide x1

Functions

1080P HD Live Video

Wi-Fi Connection

PoE Power Supply (The PoE switch is required and not provided.)

microSD card. Maximum space 128GB.

IP66 level for water proof and dust proof.

Basics

purchase separately. Recommended compatibility: Class 10, maximum space 128GB. After inserting the microSD card, you can record the event inside the camera. You need to initialize it on the EZVIZ app.
RESET| Hold down the RESET button for 10 seconds when the camera is running, the camera restarts and resets all parameters to default.
Network Interface| 10M/100M Self-adaptive Ethernet Interface Some certain models support the PoE (Power over Ethernet) addtionally.
Power Supply| 1A  12V

Troubleshooting

Q: “The device is offline.” or “The device is not registered.” prompts when

adding the camera by EZVIZ app.

A: 1. Make sure the network, that the camera is connceted to, is normal and the DHCP of router is enabled. 2. Hold down the RESET button for 10 seconds to reset the parameters if you manually changed the network parameters.

Q: How to use the microSD card for local storage?

A: 1. Make sure there is a microSD card inserted and the camera is added to your EZVIZ account. Log in the EZVIZ app and enter the “Device Details” interface, if the “Initialize Storage Card” button appears, you need to initialize the microSD card first. 2. The microSD card recording for the motion detection is enabled by default.

Q: The mobile phone cannot receive alarm prompts when the camera is online.

A: 1. Make sure the EZVIZ app is running on your mobile phone and the Motion Detection Notification is enabled. 2. For Android system, make sure the app is running in background; and for iOS, enable the message push function in “Settings > Notification”. 3. If still no alarm prompts, hold down the RESET button for 10 seconds restore the camera settings.

Q: Live view or playback failed.

A: Make sure your network is well connected. Viewing live video needs a good bandwidth. You can refresh the video, or change a network and try again.

Q: How to connect to another Wi-Fi?

A: Hold down the RESET button on the camera for 10 seconds to reset and restart the camera and reconnect the Wi-Fi about 1 minute late

References

• Manual-Hub.com - Free PDF manuals!
• Manual-Hub.com - Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>