HOOKE ROAD BXG.2039-S Wrangler JK Stinger Bumper Installation Guide

HOOKE ROAD BXG.2039-S Wrangler JK Stinger Bumper

Specifications

• Part Number: BXG.2039-S

Contents

• 2 Hex Bolt M12*35
• 10 Button Head Socket Cap Bolts Screws M10*20
• 5 Button Head Socket Cap Bolts Screws M8*16
• 8 Split Lock Washer D12
• 8 Flat Washer M12302
• 10 Flat Washer M10202
• 6 Hex Nuts M12
• 10 Flange Hex Lock Nuts M10
• 5 Flange Hex Lock Nuts M8

Tools Required:

• a. 19mm Socket Wrench;
• b. 13mm, 17mm Wrench;
• c. 5mm, 6mm L Type Wrench;

Installation Time:

About 2 hours, 2-3 people may be needed. Installation time may
differ according to your mechanical skill level.

Installation Instructions:

1. Step 1: Install the bull bar with the Button
   Head Socket Cap Bolts Screws (M1025), Split Lock Washer (D10),
   Flat Washer (M1025*2), Flange Hex Lock Nuts (M10).

   • Put the bull bar on the bumper.
   • Install and tighten the Button Head Socket Cap Bolts Screws] (M1025), Flat Washer (M1025*2), Flange Hex Lock Nuts (M10). Use a hex socket wrench or a 6mm L Type wrench.

2. Step 2: Install the other side of the bumper in the same way.

3. Step 3: Install the skid plate with Button Head Socket Cap Bolts Screws (M8*16), Flange Hex Lock Nuts (M8). Use a 5mm L Type wrench or hex socket wrench and a 17mm wrench.

4. Step 4: Install the bumper on the vehicle frame.

5. Step 5: Tighten both sides of the bumper with the Hex Bolt (M1235), Split Lock Washer (D12), Flat Washer (M1230*2), Flange Hex Lock Nuts (M12). Use a 19mm socket wrench.
   Attention: Install only the four nuts of this bumper for daily use.

6. Step 6: Install the D-rings on the bumper.

7. Step 7: The winch bracket is optional but necessary if you want to install a Winch. Install it before Step 4. If not installing a Winch, use bolts to install the winch bracket.

8. Step 8: Installation completed.

Attention:

1. The product parts may slightly differ from the actual contents but should not affect installation.
2. Contact your distributor for any questions regarding your purchase.

Frequently Asked Questions (FAQ)
Q: Can this front bumper be installed by one person?
A: While it is recommended to have 2-3 people for installation, a skilled individual may be able to install it alone given sufficient mechanical expertise.

Front Bumper

BXG.2039-S

Tools required

Installation time

About 2 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.2039-S), please scan the QR code.

Installation instruction:

1. Step 1:
   Install the bull bar with the Button Head Socket Cap Bolts Screws (M1025), Split Lock Washer (D10), Flat Washer (M1025*2), Flange Hex
   Lock Nuts (M10).

2. Put the bull bar on the bumper.
   

3. Install and tighten the Button Head Socket Cap Bolts Screws (M1025), Flat Washer (M1025*2), Flange Hex Lock Nuts (M10). As shown below.
   (Hex socket wrench or Use 6mm L Type wrench)

4. Step 2:
   Install another side of the bumper in the same way.

5. Step 3:
   Install the skid plate with Button Head Socket Cap Bolts Screws (M8*16), Flange Hex Lock Nuts (M8).
   (Tools:5mm L type wrench or Hex socket wrench and 17mm wrench)
   

6. Step 4:
   Install the bumper on the vehicle frame.As shown below.

7. Step 5:
   Tighten both side of the bumper with the Hex Bolt (M1235), Split Lock Washer (D12), Flat Washer (M1230*2), Flange Hex Lock Nuts (M12).
   As shown below.(Tools: 19mm socket wrench)
   
   Attention：
   We just install the four nuts of this bumper,and it’s enough for daily use.The picture shows on the RIGHT.

8. Step 6:
   After step5, and now install the D-rings on the bumper.

9. Step 7:
   The winch bracket is unnecessary to install, but if you want to install the Winch,you need the winch bracket to install your Winch together.And must install it before STEP 4. And if no need to install the Winch, just use some bolts to install the winch bracket.As shown below.
   

10. Step 8:
    Installation completed.;

Attention

1. The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of question about your purchase.

References

• Frame

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>