HOOKE ROAD BXG.3046-S Wrangler JL Gladiator 2 Doors Tube Half Doors Instruction Manual
- May 15, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG.3046-S Wrangler JL Gladiator 2 Doors Tube Half Doors
Contents
-
Half Doors
-
Strap
-
Door Hinges
| Qty | Part Name | Size(mm) | Picture |
|---|---|---|---|
| 8 | Button Head Socket Cap Bolts Screws | M8*25 | |
| 8 | Split Lock Washer | D8 | 
8| Flat Washer| M8201|
8| Flange Hex Lock Nuts| M8| 
Tools required
- a. 5mm socket wrench;
- b. 14mm wrench;
Installation time
About 40 minutes, 1-2 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT ANDREADINSTRUCTIONSCAREFULLY BEFORE
STARTING INSTALLATION!)
To view the electronic version (BXG.3046-S), please scan the QR code.
Installation instruction
Step 1:
Begin by removing the factory doors. Then ready to assemble and install the
half doors.
Step 2:
Before installation, please confirm and distinguish the installation location
of the door hinges.
Step 3:
Assemble the door hinges & the half doors. Don’t forget install the strap in
the below.
Note: Don’t tighten screws above firmly for a adjustable assembly with the car frame.
Step 4: Align the hinge and insert the front half door into the
appropriate position slowly
Then close the door slightly and screw the bolts. Don’t forget to tie the belt to the car frame.
Step 5: Repeat the installation for the driver side.
Step 6:
Once you have everything in place you are finished with the installation.
Congratulations on the purchase and installation of a quality Hooke Road
product!
Attention!
- The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of question about your purchase.
Google Hooke Road to find your parts.
Feel Free To Share Your Vehicle @HookeRoade4x4 with the Hashtag #hookeroad if
you’d Like
