HOOKE ROAD BXG.1031-S Spare Tire Utility Cargo Basket Storage Tray Installation Guide
- May 15, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG.1031-S Spare Tire Utility Cargo Basket Storage Tray
Contents
Tools required
- Drive Socket Ratchet Wrench;
- 4mm & 5mm Hex Bit Socket;
Installation time
- About 1 hour, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
- (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS
- CAREFULLY BEFORE STARTING INSTALLATION!)
- To view the electronic version (BXG.1031-S), please scan the QR code.
Installation instruction
Step 1: Start by assembling the panels & the cargo platform (the front side panel with the hook road logo). Use the button head socket cap bolt screws (M6*16), flat washer (N6), and flange hex lock nuts (M6).
Step 2: To assemble the two leg brackets, mount those covers to the legs using the button head socket cap bolt screws (M6*16), flat washer (M6), and flange hex lock nuts (M6).
Step 3: With the legs assembled, mount them to the basket using the button head socket cap bolts screws (M820), split lock washer (D8), flat washer (M820), flange hex lock nuts (M8). The side with the logo patterns faces outward. Don’t tighten up those bolts.
Step 4: Next, loosely install the lower brackets into the hole and slot in the bottom of the legs. These brackets should bend in beneath the legs.
Step 5: Next, set the basket up onto your spare tyre to see how far in and far out the legs of the basket need to be positioned. And then, adjust the distance to sit tight to the tyre.
Step 6: To install the oil drum brackets (Need to distinguish to driver & passenger side). Use the button head socket cap bolt screws (M820), split lock washer (D8), flat washer (M820), flange hex lock nuts (M8). Repeat the installation on the other side.
Step 7: At last, use the grey ratchet straps to tighten up the baskets. Thread the rope of the cargo tightener through the spare tyre. Insert the end of the tightener’s rope into the tightening mechanism of the tightener. Use the handle or operating device to gradually tighten the rope, securing it appropriately. You can cut the Eva to protect the strip.
Step 8
The installation is complete. We hope you enjoy a wonderful off-road life with
this quality Hooke Road product! （we don’t provide the oil drum）
Attention
- The product parts in this instruction may differ slightly from the actual product contents but generally do not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of questions about your purchase.
Feel Free To Share Your Vehicle @HookeRoad4x4 With The Hashtag #hookeroad If You’d Like
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>