HOOKE ROAD BXG.8901-S Bronco Side Steps Running Boards Rock Rails Installation Guide

June 17, 2024
HOOKE ROAD

MAKE A DIFFERENCE
Side Step
BXG.8901-S

Contents:

Passenger Side Side Step

HOOKE ROAD BXG.8901-S Bronco Side Steps Running Boards Rock Rails -
Passenger SideDriver Side Side StepHOOKE ROAD BXG.8901-S Bronco Side Steps
Running Boards Rock Rails - Driver Side

Qty Part Name Size(mm) Picture
8 Hex Bolts M10*25
8 Hex Bolts M8*25
8 Split Lock Washer D10
9 Split Lock Washer D8
8 Flat Washer M10302
9 Flat Washer M8222
8 Flange Hex Lock Nuts M8

Tool srequired:

a. Drive Socket Ratchet Wrench;
b. 18mm & 13mm Shallow Socket;
c. 18mm & 13mm Wrench;

Installation time:

About 40 minutes, 1-2 people may be needed. Installation time may differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.8901-S), please scan the QR code.

HOOKE ROAD BXG.8901-S Bronco Side Steps Running Boards Rock Rails - QR
Cordhttps://drive.google.com/drive/folders/1bYgnUAVdEAgoiZWBtNsKusjTMNVyz7Z8?usp=share_link

Installation instruction:

Driver Side Installation
Step 1: Open the package, remove the side on the side, distinguish the driver side and the passenger side. Note: The arc of the front bracket is horizontal, and the arc of the rear bracket is vertical. Step 2: Remove your factory side step, ready to install Hooke Road Side Step.
Step 3: Before installation, please remove the rear side mounting bracket of the original car to install the Hooke Road products. As the picture shown.HOOKE ROAD BXG.8901-S Bronco Side Steps Running Boards Rock Rails -
Hooke Road Step 4: Install the driver side side step into your vehicle with the Hex Bolts (M825), Flat Washer (M8222), Split Lock Washer (M8), Flange Hex Lock Nuts (M8), Hex Bolts (M1025), Flat Washer (M10302), Split Lock Washer (M10).HOOKE ROAD BXG.8901-S Bronco Side Steps Running Boards Rock Rails -
Split LockWashe Notes: When installing the Hex Bolts (M10*25) on the rear bracket, screw in the top screws first and then install other screws.
Step 5: Repeat the above installation steps in the passenger side.
Step 6: The installation is complete. We hope you enjoy a wonderful off- road life with this quality Hooke Road product!

HOOKE ROAD BXG.8901-S Bronco Side Steps Running Boards Rock Rails - Hooke
Road 1 Attention:

  1. The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
  2. Please feel free to contact your distributor if you have any kind of question about your purchase.

Hooke Road to find your parts
@HookeRoad4x4
Post Your Jeep/Truck w/Hashtag #hookeroad to Win Discount Every Week

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

HOOKE ROAD User Manuals

Related Manuals