VISHAY DF005S General Semiconductor Owner’s Manual
- June 13, 2024
- VISHAY
Table of Contents
VISHAY DF005S General Semiconductor
LINKS TO ADDITIONAL RESOURCES
PRIMARY CHARACTERISTICS
IF(AV)| 1 A
VRRM| 50 V, 100 V, 200 V, 400 V, 600 V,
800 V, 1000 V
IFSM| 50 A
IR| 5 μA
VF at IF = 1.0 A| 1.1 V
TJ max.| 150 °C
Package| DFS
Circuit configuration| Quad
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER| SYMBOL| DF005S| DF01S| DF02S| DF04S|
DF06S| DF08S| DF10S| UNIT
Device marking code| | DF005S| DF01S| DF02S| DF04S| DF06S| DF08S| DF10S|
Maximum repetitive peak reverse voltage| VRRM| 50| 100| 200| 400| 600| 800|
1000| V
Maximum RMS voltage| VRMS| 35| 70| 140| 280| 420| 560| 700| V
Maximum DC blocking voltage| VDC| 50| 100| 200| 400| 600| 800| 1000| V
Maximum average forward output rectified current at TA = 40 °C (1)| IF(AV)|
1.0| A
Peak forward surge current single half sine-wave superimposed on rated load|
IFSM| 50| A
Rating for fusing (t < 8.3 ms)| I2t| 10| A2s
Operating junction and storage temperature range| TJ, TSTG| -55 to +150| °C
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER| TEST CONDITIONS| SYMBOL| DF005S| DF01S|
DF02S| DF04S| DF06S| DF08S| DF10S| UNIT
Maximum instantaneous forward voltage drop per diode| 1.0 A| VF| 1.1| V
Maximum DC reverse current at rated DC blocking voltage per diode| TA = 25 °C|
IR| 5.0| μA
TA = 125 °C| 500
Typical junction capacitance per diode (1)| | CJ| 25| pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER| SYMBOL| DF005S| DF01S| DF02S| DF04S|
DF06S| DF08S| DF10S| UNIT
Typical thermal resistance (1)| RqJA| 40| °C/W
RqJL| 15
ORDERING INFORMATION (Example)
PREFERRED P/N| UNIT WEIGHT (g)| PREFERRED PACKAGE CODE| BASE
QUANTITY| DELIVERY MODE
DF06S-E3/45| 0.399| 45| 50| Tube
DF06S-E3/77| 0.399| 77| 1500| 13″ diameter paper tape and reel
FEATURES
- UL recognition, file number E54214
- Ideal for automated placement
- High surge current capability
- Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C
- Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
General purpose use in AC/DC bridge full wave rectification for SMPS, lighting ballasts, adapters, battery chargers, home appliances, office equipment, and telecommunication applications.
MECHANICAL DATA
- Case: DFS
- The molding compound meets the UL 94 V-0 flammability rating
- Base P/N-E3 – RoHS-compliant, commercial-grade
- Terminals: matte tin-plated leads, solderable per
- J-STD-002 and JESD22-B102
- E3 suffix meets JESD 201 class 1A whisker test
- Polarity: as marked on the body
Note
(1) Units mounted on PCB with 0.51″ x 0.51″ (13 mm x 13 mm) copper pads
Note
(1) Measured at 1.0 MHz and applied reverse voltage of 4.0 V
Note
(1) Units mounted on PCB with 0.51″ x 0.51″ (13 mm x 13 mm) copper pads
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS, AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies, or incompleteness contained in any datasheet or in any other disclosure relating to any product.
Vishay makes no warranty, representation, or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential, or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for a particular purpose, non- infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. The inclusion of these hyperlinks does not constitute an endorsement or approval by Vishay of any of the products, services, or opinions of the corporation, organization, or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality, or content of the third-party website or for subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.