vita 14 Inch Vaxa Self Watering Planter User Guide
- June 6, 2024
- Vita
Table of Contents
vita 14 Inch Vaxa Self Watering Planter
FEATURES
MODULAR INNER DESIGN
Hidden inner design can prevent water evaporation to keep your plant healthy.
WATER LEVEL INDICATOR
The water level indicator makes it easy to know how much water your planter
has. The shaft design allows less compaction of the soil which can be caused
by pouring water directly on the soil.
DRAIN PLUG
With the unique inner design, now you can clean up your planter without
interfering with your plant.
COMPONENTS
HOW TO USE
-
SET UP
First, make sure the black and red drain plug are firmly installed. (Remove red drain plug for outdoor usage). -
ADD YOUR PLANT
Put a layer of soil in the Vaxa Planter and plant any type of green you like, then carefully cover the root with soil again. -
ADD WATER
Once your plant has been planted, add water through the self-watering spout until the water level indicator shows full -
FERTILIZATION
Depending on the plant species, you can start fertilizing the plant after 3 to 6 months. Use a liquid fertilizer and simply add it to your water spout when watering -
WATERING
When watering, add water to the self-watering spout and not into the soil itself. This method can prevent mosquito breeding out reservoir below. Once established, water through the self watering spout to decrease the chances of roots rotting and prevent mosquito breeding outdoors. -
DROUGHT
When the water level indicator reaches “Refill”, you do not need to water immediately. The plant is now in the period of drought. Depending on your plant and location, normal irrigation should start again 2 to 7 days after the drought period.
BASE ASSEMBLY
Note: When assembling the Vaxa legs, be sure to straighten them up/down before tightening firmly.
Note: The natural characteristics of bamboo wood mean it will contract and adjust to the unique conditions of each individual home. We recommend giving each leg a further tighten after 1 month.
WATER GAUGE ASSEMBLY
