TRIPP LITE DMPDD1735AM Precision Placement Dual-Display Desk Clamp User Manual

October 27, 2023
Tripp Lite

TRIPP LITE DMPDD1735AM Precision Placement Dual-Display Desk Clamp User Manual

TRIPP LITE DMPDD1735AM Precision Placement Dual-Display Desk Clamp User
Manual

tripplite.com/warranty

tripplite.com/support

Safety Instructions

NOTE: Read the entire instruction manual before you start assembly and installation.

WARNING

  • Do not begin the installation until you have read and understood the instructions and warnings contained in this manual. If you have any questions regarding any of the instructions or warnings, please visit tripplite.com/support.
  • This mount was designed to be installed and utilized ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
  • This product should only be installed by someone of good mechanical ability, with basic building experience and a full understanding of this instruction manual.
  • Ensure the mounting surface can safely support the combined load of the equipment and all attached hardware and components.
  • Use an assistant or mechanical lifting equipment to safely lift and position equipment.
  • Tighten screws firmly, but do not over-tighten. Over-tightening screws can damage the unit and greatly reduce the screws’ holding power.
  • This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.

Warranty and Product Registration

5-Year Limited Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 5 years from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, at its sole discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied
warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction.)
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application.

PRODUCT REGISTRATION

Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

  • No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products.

Component Checklist

IMPORTANT: Ensure you have received all parts according to the component checklist prior to installing.
If any parts are missing or faulty, visit tripplite.com/support for service.

TRIPP LITE DMPDD1735AM Precision Placement Dual-Display Desk Clamp -
Component Checklist

Package P

TRIPP LITE DMPDD1735AM Precision Placement Dual-Display Desk Clamp - Package
P

Package M (x2)

Assembly

1) Base Assembly and Desk Installation

1a. Edge Installation

TRIPP LITE DMPDD1735AM Precision Placement Dual-Display Desk Clamp - Edge
Installation

TRIPP LITE DMPDD1735AM Precision Placement Dual-Display Desk Clamp - Edge
Installation 2

1b. Hole Installation

TRIPP LITE DMPDD1735AM Precision Placement Dual-Display Desk Clamp - Hole
Installation

TRIPP LITE DMPDD1735AM Precision Placement Dual-Display Desk Clamp - Hole
Installation 2

2) Attaching the Arm to the Base

TRIPP LITE DMPDD1735AM Precision Placement Dual-Display Desk Clamp -
Attaching the Arm to the Base

3) Attaching the Mounting Bracket to the Arm

TRIPP LITE DMPDD1735AM Precision Placement Dual-Display Desk Clamp -
Attaching the Mounting Bracket to the Arm

4) Attaching the Handle

TRIPP LITE DMPDD1735AM Precision Placement Dual-Display Desk Clamp -
Attaching the Handle

5) Attaching the Universal Plate to the Mounting Bracket

TRIPP LITE DMPDD1735AM Precision Placement Dual-Display Desk Clamp -
Attaching the Universal Plate to the Mounting Bracket

6) Balancing the Arm

TRIPP LITE DMPDD1735AM Precision Placement Dual-Display Desk Clamp -
Balancing the Arm

7) Securing the Cable Management Covers

TRIPP LITE DMPDD1735AM Precision Placement Dual-Display Desk Clamp -
Securing the Cable Management Covers

8) Adjustment and Applying the Antimicrobial Tape

TRIPP LITE DMPDD1735AM Precision Placement Dual-Display Desk Clamp -
Adjustment and Applying the Antimicrobial Tape

Maintenance

  • Check that the bracket is secure and safe to use at regular intervals (at least every three months).
  • Please visit tripplite.com/support if you have any questions.

Tripp lite logo

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Tripp Lite User Manuals

Related Manuals