VONYX VDX10 Phantom Power Supply Instruction Manual
- June 12, 2024
- VONYX
Table of Contents
VONYX VDX10 Phantom Power Supply
Product Information
- Product Name: VDX10 Phantom Power Supply
- Reference Number: 172.796
- Instruction Manual Version : 1.0
- Language: English
- Certification: CE Certified
Product Usage Instructions
- Prior to using the product, read the manual thoroughly to understand all features and instructions. Failure to do so may invalidate the warranty.
- To avoid fire and electrical shock, take all necessary precautions while using the product.
- Repairs should only be performed by a qualified technician to prevent electrical shock.
- Do not open the housing of the product as it contains voltage-carrying parts.
- Avoid placing metal objects or liquids into the product, as this may cause electrical shock and malfunction.
- Keep the product away from heat sources and vibrating surfaces. Ensure that the ventilation holes are not covered.
- The product is not suitable for continuous use.
- Handle the mains lead with care and avoid damaging it.
- Avoid repeatedly switching the product on and off, as it can shorten its lifetime.
- Keep the product out of reach of children and do not leave it unattended.
- Do not use cleaning sprays to clean switches as they can cause dust and grease deposits. Seek advice from a specialist in case of malfunction.
- Do not force the controls on the product.
- If there is a speaker inside the product, be cautious as it can cause high voltages that may pose a shock hazard.
- The product is certified CE, and any modifications or changes to the product can invalidate the CE certificate and warranty.
- Dispose of electric products properly by bringing them to a recycling center. Contact your local authorities or dealer for guidance.
- Do not attempt to repair the product yourself, as it can invalidate the warranty. Avoid making any changes to the product.
- The warranty does not cover accidents or damages caused by inappropriate use or disregard of the warnings in the manual. Vonyx is not responsible for personal injuries or damages resulting from a failure to follow safety recommendations and warnings.
Unpacking Instructions
- Carefully unpack the VDX10 Phantom Power Supply.
Controls and Connections
- Power Input: Connect the included 5VDC type-C USB power input to provide power to the device.
- Signal Output: Use the XLR signal output socket to connect the device to an audio system or recording equipment.
- Microphone Input: Connect your microphone to the XLR microphone input socket for signal input.
Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to benefit fully from all features. Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.
- Prior to using the product, please ask advice from a specialist. When the product is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
- The product contains voltage carrying parts. Therefore, do NOT open the housing.
- Do not place metal objects or pour liquids into the product. This may cause electrical shock and malfunction.
- Do not place the product near heat sources such as radiators, etc. Do not place the product on a vibrating surface. Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
- When unplugging the product from a mains outlet, always pull the plug, never the lead.
- Do not plug or unplug the product with wet hands.
- If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
- If the product is damaged to such an extent that internal parts are visible, do NOT plug the product into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the product to a rheostat or dimmer.
- To avoid fire and shock hazard, do not expose the product to rain and moisture.
- All repairs should be carried out by a qualified technician only.
- Connect the product to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the product will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
- If the product has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the product in humid rooms or outdoors.
- To prevent accidents in companies, you must follow the applicable guidelines and follow the instructions.
- Do not repeatedly switch the product on and off. This shortens the lifetime.
- Keep the product out of the reach of children. Do not leave the product unattended.
- Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
- Do not force the controls.
- If this product is with speaker inside which can cause magnetic field. Keep the product at least 60cm away from computer or TV.
- If this product has a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise the battery may be permanently damaged.
- If the battery is damaged, please replace with same specifications battery. And dispose the damaged battery environment friendly.
- If the product has fallen, always have it checked by a qualified technician before you switch the product on again.
- Do not use chemicals to clean the unit. They damage the varnish. Only clean the product with a dry cloth.
- Keep away from electronic equipment that may cause interference.
- Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
- Switch the product off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the product.
- Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this product.
- Keep the original packing material so that you can transport the product in safe conditions.
This mark attracts the attention of the user to high voltages that are present
inside the housing and that are of sufficient magnitude to cause a shock
hazard. This mark attracts the attention of the user to important instructions
that are contained in the manual and that he should read and adhere to. The
product has been certified CE. It is prohibited to make any changes to the
product. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the product will function normally, it must be
used in rooms with a temperature between 5°C/41°F and 35°C/95°F. Electric
products must not be put into household waste. Please bring them to a
recycling centre. Ask your local authorities or your dealer about the way to
proceed. The specifications are typical. The actual values can slightly change
from one unit to the other. Specifications can be changed without prior
notice. Do not attempt to make any repairs yourself. This would invalid your
warranty. Do not make any changes to the product. This would also invalid your
warranty. The warranty is not applicable in case of accidents or damages
caused by inappropriate use or disrespect of the warnings contained in this
manual. Vonyx cannot be held responsible for personal injuries caused by a
disrespect of the safety recommendations and warnings. This is also applicable
to all damages in whatever form.
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to
ensure that all parts are present and have been received in good condition.
Notify the shipper immediately and retain packaging material if any parts
appear damaged from shipping or the package itself shows signs of mishandling.
Save the package and all packaging materials. If the product must be returned,
it is important that the product is returned in the original factory box and
packaging. If the device has been exposed to drastic temperature fluctuation
(e.g. after transportation), do not switch it on immediately. The arising
condensation water might damage your device. Leave the device switched off
until it has reached room temperature.
CONTROLS AND CONNECTIONS
-
POWER INPUT
5VDC type-C USB power input. -
SIGNAL OUTPUT
XLR signal output socket. -
MICROPHONE INPUT
XLR microphone input socket. -
POWER LED INDICATOR
LED indicator showing power status. -
ON/OFF
Press to turn the device on/off.
SETUP EXAMPLE & INSTRUCTIONS
- Plug the female end of the supplied XLR cable into the XLR socket of a condenser microphone.
- Plug the male end of the supplied XLR cable into the microphone XLR socket of the device.
- Use another XLR-type cable to plug into the signal output socket and connect with a mixer, sound card, or other device with a balanced input.
- Turn on the device, the power LED indicator will light up. 48V phantom power will be provided to the condenser-type microphone to make it work.
WARNING: turn phantom power off when plugging and unplugging microphones to prevent any potential power surge, pops, and other loud noises, which could damage your speakers.
TECHNICAL SPECIFICATION
- Input connections: USB, XLR (3-pin)
- Output connections: XLR (3-pin)
- Power supply : 100-240VAC 50/60Hz (5V Adapter)
- Dimensions (L x W x H) : 100 x 90 x 52mm
- Weight (kg): 0,46
The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice. The products referred to in this manual conform to the European Community Directives to which they are subject:
European Union
- Tronios B.V.,
- Bedrijvenpark Twente Noord 18,
- 7602KR Almelo, The Netherlands
- 2014/30/EU
- 2011/65/EC
United Kingdom
- Tronios Ltd.,
- 130 Harley Street,
- London W1G 7JU, United Kingdom
- S.I. 2016:1091
- S.I. 2012:3032
Specifications and design are subject to change without prior notice. www.tronios.com. Copyright © 2023 by TRONIOS the Netherlands
References
- Samen zijn we open. Samen staan we sterk. - Stichting Open
- Samen zijn we open. Samen staan we sterk. - Stichting Open
- Sound & Light distributor - Tronios.com
- Homepage - Wecycle
- Homepage - Wecycle
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>