VISHAY S1A Surface-Mount Glass Passivated Rectifier Owner’s Manual
- June 12, 2024
- VISHAY
Table of Contents
S1A, S1B, S1D, S1G, S1J, S1K, S1M
Vishay General Semiconductor
Surface-Mount Glass Passivated Rectifier
SMA (DO-214AC)
ADDITIONAL RESOURCES
PRIMARY CHARACTERISTICS
IF(AV)| 1.0 A
VIRRM| 50 V, 100 V, 200 V, 400 V, 600 V,
800 V, 1000 V
IFsm| 40 A, 30 A
EAS| 5 mJ
IR| 1.0 pA, 5.0 pA
VF| 1.1 V
Tj max.| 150 °C
Package| SMA (D0-214AC)
Circuit configuration| Single
FEATURES
- Low profile package
- Ideal for automated placement
- Glass passivated pellet chip junction
- Low forward voltage drop
- Low leakage current
- High forward surge capability
- Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C
- AEC-Q101 qualified available – Automotive ordering code: base P/NHE3 or P/NHM3
- Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes for consumer, automotive, and telecommunication.
MECHANICAL DATA
Case: SMA (DO-214AC)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 – RoHS-compliant, commercial grade
Base P/N-M3 – halogen-free, RoHS-compliant, commercial grade
Base P/NHE3_X – RoHS-compliant and AEC-Q101 qualified
Base P/NHM3_X – halogen-free, RoHS-compliant and AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B,…..)
Terminals: matte tin plated leads, solder able per J-STD-002 and JESD 22-B102
E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test
Polarity: color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER| SYMBOL| S1A| S1 B| S1D| S1G| S1J| S1K| S1 M| UNIT
Device marking code| | SA| SB| SD| SG| SJ| SK| SM|
Maximum recurrent peak reverse voltage| VRRM| 50| 100| 200| 400| 600| 800|
1000| V
Maximum RMS voltage| VRMS| 35| 70| 140| 280| 420| 560| 700| V
Maximum DC blocking voltage| Voc| 50| 100| 200| 400| 600| 800| 1000| V
Maximum average forward rectified current (fig. 1)| IF(Av)| 1.0| A
Peak forward surge current 8.3 ms single half sine-wave superimposed on rated
load| IFSM| 40| 30| A
Non-repetitive peak reverse avalanche energy at 25 °C, lAs = 1 A, L = 10 mH|
EAs| 5| mJ
Operating junction and storage temperature range| LI ;TO| -55 to +150| °C
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER| TEST CONDITIONS| SYMBOL| S1A| S1 B| S1 D| S1G| S1 J| S1 K| S1 M|
UNIT
Maximum instantaneous forward voltage| 1.0 A| Vf| 1.1| V
Maximum DC reverse current at rated DC blocking voltage| | TA = 25 °C| Ir|
1.0| 5.0| µA
TA = 125 °C| 50
Typical reverse recovery time| IF = 0.5 A, IR = 1.0 A, Irr= 0.25 A| trr| 1.8|
µs
Typical junction capacitance| 4.0 V, 1 MHz| Cj| 1.2| pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER| SYMBOL| S1A| S1 B| S1 D| S1G| S1 J| S1 K| S1 M| UNIT
Typical thermal resistance (1)| RUJA| 75| 85| °C/W
ROJL| 27| 30
Note
(1)Thermal resistance from junction to ambient and from junction to lead
mounted on PCB with 0.2″ x 0.2″ (5.0 mm x 5.0 mm) copper pad areas
ORDERING INFORMATION (Example)
PREFERRED P/N| UNIT WEIGHT (g)| PREFERRED PACKAGE CODE| BASE
QUANTITY| DELIVERY MODE
S1J-E3/61T| 0.064| 61T| 1800| 7″ diameter plastic tape and reel
S1J-E3/5AT| 0.064| 5AT| 7500| 13″ diameter plastic tape and reel
S1JHE3_A/H (1)| 0.064| 11| 1800| 7″ diameter plastic tape and reel
S1JHE3_A/1 (1)| 0.064| I| 7500| 13″ diameter plastic tape and reel
S1J-M3/61T| 0.064| 61T| 1800| 7″ diameter plastic tape and reel
S1J-M3/5AT| 0.064| 5AT| 7500| 13″ diameter plastic tape and reel
S1JHM3_A/1-1 (1)| 0.064| H| 1800| 7″ diameter plastic tape and reel
S1JHM3_A/1(1)| 0.064| I| 7500| 13″ diameter plastic tape and reel
Note
(1)AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise
noted)
PACKAGE OUTLINE DIMENSIONS
in inches (millimeters)
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT
NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Antitechnology, Inc., its affiliates, agents, and employees, and all
persons acting on its or their behalf (collectively, “Vishay”), disclaim any
and all liability for any errors, inaccuracies or incompleteness contained in
any datasheet or in any other disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the
suitability of the products for any particular purpose or the continuing
production of any product. To the maximum extent permitted by applicable law,
Vishay disclaims (i) any and all liability arising out of the application or
use of any product, (ii) any and all liability, including without limitation
special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-
infringement and merchantability.
Statements regarding the suitability of products for certain types of
applications are based on Vishay’s knowledge of typical requirements that are
often placed on Vishay products in generic applications. Such statements are
not binding statements about the suitability of products for a particular
application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable
for use in a particular application. Parameters provided in datasheets and /
or specifications may vary in different applications and performance may vary
over time. All operating parameters, including typical parameters, must be
validated for each customer application by the customer’s technical experts.
Product specifications do not expand or otherwise modify Vishay’s terms and
conditions of purchase, including but not limited to the warranty expressed
therein.
Hyperlinks included in this datasheet may direct users to third-party
websites. These links are provided as a convenience and for informational
purposes only. Inclusion of these hyperlinks does not constitute an
endorsement or an approval by Vishay of any of the products, services or
opinions of the corporation, organization or individual associated with the
third-party website.
Vishay disclaims any and all liability and bears no responsibility for the
accuracy, legality or content of the third-party website or for that of
subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for
use in medical, life-saving, or life-sustaining applications or for any other
application in which the failure of the Vishay product could result in
personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in
such applications do so at their own risk. Please contact authorized Vishay
personnel to obtain written terms and conditions regarding products designed
for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual
property rights is granted by this document or by any conduct of Vishay.
Product names and markings noted herein may be trademarks of their respective
owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
For technical questions within your region:
DiodesAmericas@vishay.com,
DiodesAsia@vishay.com,
DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED
HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>