n-FAB F214BRKR RKR Rails Ford Bronco 4DR Installation Guide
- June 13, 2024
- n-FAB
Table of Contents
n-FAB F214BRKR RKR Rails Ford Bronco 4DR
Installation Instructions
| PARTS INCLUDED | QTY |
|---|---|
| PRT# F194RKRCC | |
| DRIVER SIDE RAIL | 1 |
| PASSENGER SIDE RAIL | 1 |
| PRT# F194RKRCCS4 | |
| DRIVER SIDE RAIL | 1 |
| PASSENGER SIDE RAIL | 1 |
| DETACHABLE STEPS (PAIR) | 2 |
HARDWARE
DESCRIPTION| QTY.
---|---
HWKT-04239X|
FHLB
04240X
| M10x25mm HEX FLANGED
BOLT
| 12
DO NOT USE IMPACT TOOLS
STEP 1:
Identify driver side step.
STEP 2:
Remove any factory running boards or hardware and discard.
STEP 3:
Clean/tap the three factory threaded mounting locations.
STEP 4:
Carefully place step into place and loosely fasten using the supplied M10X25mm hardware.
Step 5:
Next, tighten the three lower bolts first, following with the three upper bolts.
Step 6:
Repeat steps 2-5 with passenger side.
Step7:
Your install is now complete.
PRT# JPTS32 Detachable Step Installation.
Step 1:
Attach the step to the mounts located in between the RKR rails using the supplied 1/2” x 1” flanged hex bolts and 1/2”” flanged hex nuts. NOTE: The step will mount to the left of the bracket opposite of the weld.
Step 2:
Torque bolts to a target of 40 ft/lbs. / 54nm
I-SHEET NUMBER: INST-00291
PART NUMBER: F214BRKR, F214BRKRS4
PRODUCT: RKR RAILS
APPLICATION: 21-22 FORD BRONCO 4DR
Customer Support
12302 Shiloh Church Rd. Houston TX 77066 Phone 281-880-6322 – Fax 281-880-6325
u-fab.com
nfabinc
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>