n-FAB J19BR-RLT Sports Bar Instruction Manual
- June 9, 2024
- n-FAB
Table of Contents
n-FAB J19BR-RLT Sports Bar
HARDWARE HWKT- 11808X|
---|---
CARB-
09609| 3/8”X1” CARRIAGE BOLT| 4
FLNT-
00664| 3/8” FLANGED NUT| 4
BHCS-
11852| M8X12MM BUTTON HEAD| 6
FW-
11854| M8 FLAT WASHER| 6
CHNT-
11810| M8 THREADED CHANNEL NUT| 6
PARTS INCLUDED| QTY
---|---
CENTER LIGHT MOUNT ASSEMBLY| 1
DRIVER SIDE ASSEMBLY| 1
PASSENGER SIDE ASSEMBLY| 1
ASSEMBLY
Step 1: Attach the Center section to the driver and passenger side
assemblies using the supplied 3/8” x 1” carriage bolt (x4) and 3/8” fanged nut
(x4) and leave finger tight for now.
NOTE: Begin with the upper bolt and nut first to have easier access to
the lower fasteners.
Step 2: With
additional help, carefully place Sport Bar onto bed rails aligning edge with
the plastic cap on both sides with the “ROLL-N-LOCK” logo centered in the cut
out.
Step 3: Slide
(x6) threaded cha nnel nu ts throug h rear o pening o f the T- slotted b ed
rail and align with the mounting holes in the Spo rt Bar.
Step 4: Fasten using the supplied M8 x12mm button head bolts and washers.
(7-10 ft/lbs torque)
Step 5: Fully
tighten (x4) carriage bolts in the center section.
- Periodical check all fasteners for tightness.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>