Dahua NVR Connect PG Camera User Guide
- June 14, 2024
- Dahua
Table of Contents
Dahua NVR Connect PG Camera
Connectivity
-
Connect the camera to the computer，Download and install Hikvision search tool “SADP”.
Download：
https://www.hikvision.com/en/support/tools/hitools/TS20200826033/?q=sadptool&position=2
-
Modify camera IP address.
Modify the IP address to be an address between 10.1.1.2—10.1.1.254 and the gateway is set to 10.1.1.1，Enter camera password.
-
Connect the camera to the POE port of Dahua NVR.
-
Right mouse button–Main Menu — CAMERA — click “Manual Add” — 1. Select the “Onvif” protocol — fill in the camera’s modified IP address — 3. Fill in the camera’s IP address, and click “Connect” — click “OK”.ect the camera to the POE port of Dahua NVR.
PS: When the camera status is displayed in green, the camera is successfully connected. If it is displayed in red, there is an error in the connection. Follow steps 1-5 to check whether the difference between the camera and the nvr is set correctly.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>