HUIJIECHELIAN T29-CEV Terminal T-BOX Vehicle User Manual

HUIJIECHELIAN T29-CEV Terminal T-BOX Vehicle

Specifications

• Product Name: Vehicle Terminal T-BOX
• Product Model: T29-CEV
• Operating Voltage: 9-16VDC
• Operating Current: 100mA
• Size: L160mmW120mmH40mm
• Communication Type: 4G, Bluetooth
• Operating Temperature: -40°C to +85°C
• Storage Temperature: -40°C to +85°C

Product Overview
Vehicle Terminal T-Box provides a remote intelligent vehicle control terminal with functions such as remote start / stop, window control, trunk control, air conditioning control, fault code reading, remote diagnosis, and more.

Product Functions

• Lock/Unlock
• Open/Close Window
• Remote Control
• Open/Close Trunk
• Open/Close Sunroof
• Open/Close Air Conditioner
• Status Monitor
• Diagnostic
• Others: Set Temperature, Monitoring vehicle Status, Read DTC,
• Remote Diagnose, Updating Firmware

Product Installation Operation Process:

1. Equipment Installation:
2. Check the equipment for appearance and completeness of accessories.
3. Select the terminal installation location as per requirements.
4. The terminal host should be installed in the designated position of the vehicle, connected to the reserved main line of the vehicle, and fixed with screws.
5. Device Binding and Activation:
6. After installation, use the B-end APP to bind the equipment with the vehicle.
7. Check that all vehicle control functions are normal.
8. If the test is successful, the equipment will be automatically activated.

Frequently Asked Questions (FAQ):

• Q: What communication modes does the T-BOX support?
  A: The T-BOX supports 4G, BLE, and can still support users to control the car in special scenarios such as no network signal and mobile phone shutdown.

• Q: What functions can be monitored in real-time through the APP?
  A: Users can view door lock status, door status, window status, sunroof status, air conditioning status, battery voltage, and BMS battery status in real-time through the APP.

• Q: How does the T-BOX handle power consumption when the vehicle is dormant?
  A: The T-BOX can follow the vehicle to sleep, reducing its power consumption to a minimum when the vehicle is dormant. It automatically wakes up when the vehicle wakes up or when the user controls the vehicle through the network or BLE.

Product User Manual
Vehicle Terminal T-BOX
Product Model： T29-CEV
HANGZHOU HUIJIECHELIAN TECHNOLOGY CO., LTD

Product Composition and Interface Definition

Product Overview

• Vehicle Terminal T-Box provided a remote intelligent vehicle control terminal, the main functions are remote start / flameout vehicle, remote switch window, remote switch tail box, remote switch air conditioning, reading the whole car fault code, remote diagnosis, etc.
• The T-BOX supports three communication modes: 4G, BLE, and can still support users to control the car in special scenarios such as no network signal and mobile phone shutdown.
• The T-BOX can monitor the door lock, door, window, sunroof, air conditioning, battery voltage, BMS battery status, which users can view in real time through the APP. When the vehicle has anti-theft alarm, tire failure and other problems, T-BOX can immediately push the fault information to the owner’s mobile phone.
• The T-BOX can follow the vehicle to sleep, reducing its power consumption to a minimum when the vehicle is dormant.
• When the vehicle wakes up or the user controls the vehicle through the network, BLE , T-BOX will automatically wake up and enter the working state.

Product physical schematic diagram

• Product name：Vehicle Terminal
• T-BOX Product model：T29-CEV
• Product size：L160mmW120mmH40mm

Product External Interface Definition

Description of production parameters and functions

List of production parameters

List of production functions

Remote Control

| Lock/Unlock|
Open/Close Window|
Open/Close Trunk|
Open/Close Sunroof|
Open/Close Air Conditioner|
Set Temperature|
Status Monitor| Monitoring vehicle Status| Including status of door lock, doors, windows, trunk, sunroof, air conditioner and

battery pack.

Diagnostic

| Read DTC| Read DTC of the vehicle
Remote Diagnose| Support dealer shop to diagnose the vehicle with the support of this production and another remote diagnose device.
Others| Updating Firmware| Support BLE/Net to update device firmware
5. Product installation operation process

Product installation operation process

1. Equipment installation
2. Check the equipment Check whether the equipment appearance is good, whether the relevant accessories are complete.
3.  Select the terminal installation location requirement
4. The terminal host shall be installed in the designated position of the vehicle, connected to the reserved main line of the vehicle, and fixed with screws.
5. Device binding and activation
   After the equipment is installed, the dealer operator shall use the B-end APP to bind the equipment with the vehicle, and check that all the vehicle control functions are normal. After passing the test, the equipment will be automatically activated.

Analysis of Common Problems

1. Common problem analysis****
   fault phenomenon| analysis of causes| processing method
   ---|---|---
   The equipment is offline| SIM card overdue shutdown| Contact the network operator to pay for the

fee

Vehicles are in the underground parking lot, and

the tunnel signal is weak

| Leave the area with a poor signal
2. Precautions

1. Please pay attention to waterproof for electronic products.
2. Electricity is DC 9-15VDC 100mA DC, installation should first determine whether the user’s power system is within this range, exceeding the maximum voltage of the terminal will damage the terminal.
3. When the ambient temperature exceeds the normal operating temperature range of the terminal, it is recommended to reduce the power off.
4. When the vehicle is in an underground parking lot, tunnel or garage, it will affect the signal of the location. And the communication network signal blind area may cause the equipment to go offline; when the vehicle leaves the above area, the equipment will automatically return to normal operation.
5. In case of any abnormal situation, please do not repair it by yourself. The manufacturer shall not be liable for damage caused by connection of non-original accessories or removed connections between parts.

After sales service

1. This product shall enjoy a one-year warranty service from the date of installation. During the warranty period, for equipment damage caused by non-human factors or product quality, please contact the agent or call the after-sales service department
2. The damage caused by the customer’s private disassembly or force majeure (such as flood, vehicle accident) shall not be repaired.
3. After the expiration of the warranty period, the product damage and failure caused by the use, but the cost of maintenance materials should be charged.4. Provide customers with free consulting and technical services such as the purchase, use and installation of products.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm fulinterferenc e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or reloca te the receiving antenna.
• Increase the separation between the equi pment and receiver.
• Connect the equipment into an outlet on a circuit different f rom that to which the receiver is c onnected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>