n-FAB F212BRKR RKR Rock Rails Installation Guide
- June 13, 2024
- n-FAB
Table of Contents
F212BRKR RKR Rock Rails
I-SHEET NUMBER: INST-00321
PART NUMBER: F212BRKR, F212BRKRS2
PRODUCT: RKR RAILS
APPLICATION: 21-22 FORD BRONCO 2DR
| PARTS INCLUDED | QTY |
|---|---|
| PRT# F192RKRCC | |
| DRIVER SIDE RAIL | 1 |
| PASSENGER SIDE RAIL | 1 |
| PRT# F192RKRCCS2 | |
| DRIVER SIDE RAIL | 1 |
| PASSENGER SIDE RAIL | 1 |
| DETACHABLE STEPS (PAIR) | 1 |
| HARDWARE DESCRIPTION | QTY. |
|---|---|
| HWKT-12094X |
FHLB
04240X| M10x25mm HEX FLANGED BOLT| 8
DO NOT USE IMPACT TOOLS
STEP 1: Identify driver side step.
STEP 2: Remove any factory running boards or hardware and discard.
STEP 3: Clean/tap the three factory threaded mounting locations.
STEP 4: Carefully place step into place and loosely fasten using the supplied M10X25mm hardware.
Step 5: Next, tighten the three lower bolts first, following with the
three upper bolts.
Step 6: Repeat steps 2-5 with passenger side.
Step7: Your install is now complete.
PRT# JPTS32 Detachable Step Installation.
Step 1: Attach the step to the mounts located in between the RKR rails
using the supplied 1/2” x 1” flanged hex bolts and 1/2”” flanged hex nuts.
NOTE: The step will mount to the left of the bracket opposite of the weld.
Step 2: Torque bolts to a target of 40 ft/lbs. / 54nm
12302 Shiloh Church Rd. Houston TX 77066 Phone 281-880-6322 – Fax 281-880-6325
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>