ION Total PA Supreme High Power Bluetooth Sound System with Lights User Guide
- June 7, 2024
- ION
Table of Contents
Total PA Supreme
Quickstart Guide
Box Contents
Total PA Supreme
Microphone & Cable
Telescoping Speaker Stand
Power Cable (IEC)
Quickstart Guide / Safety & Warranty Manual
Support
IMPORTANT: For the full User Guide, visit ionaudio.com.
For the latest information about this product (documentation, technical
specifications, system requirements, compatibility information, etc.) and
product registration, visit ionaudio.com.
For additional product support, visit
ionaudio.com/support.
Caution: Do not expose Total PA Supreme to rain or standing water.
Features
|
-
Media Panel:
Mode
Play/Pause
Repeat
Previous/Back
Next/Forward -
USB Port
-
SD Card Slot
-
Display 14.
-
Mic Inputs (1/4″, XLR)
-
Mic Input Volume
-
Aux Input (1/8″)
-
XLR Input
-
Aux Input Volume
-
Mix Out (XLR)
-
Mic Echo
| 12. Low EQ
13. High EQ
14. Master Volume
15. Power LED
16. Clip LED
17. Link
18. Light Mode
19. Power Cable Input
20. Fuse Holder
21. Power Switch
---|---|---
Operation
App Control
IMPORTANT : To ensure the best possible experience with the ION Sound XP
app, use the most current Android OS or iOS on your device.
Note: Ensure that your device has internet access via your service provider or
wireless connection. You can also download the app on your computer, but
remember to connect and sync your device to transfer the app.
Follow these steps to download the free app on your device:
- Open the Apple App Store or Google Play on your device .
- Search for the ION Sound XP app.
- Follow the on-screen instructions to download and install the app.
- Once downloaded, the ION Sound XP app will appear on your device’s home screen.
Light Modes
Press the Light Mode button to toggle between five modes for the lights on the
front panel:
- Color Wheel: The lights spin on and around the woofer.
- Color Wheel Beat Sync: The lights spin on and around the woofer according to the tempo of the music playing.
- Color Cycle: The lights steadily cycle through different colors.
- Beat Sync: The lights flash and change colors according to the tempo of the music playing.
- Off: The lights turns turn off.
Automatic Power Shut-Off
Total PA Glow 3 is equipped with an automatic power shut-off to save energy in
compliance with the energy efficiency regulations for compact audio products.
Total PA Glow 3 will enter an energy-saving mode after 20 minutes unless an
audio signal at a moderate level is detected from the XLR Input, the Aux
Input, the USB/SD media player, the Radio, or a Bluetooth connection. In
energy-saving mode, the display and lights will turn off and audio playback
will be disabled, but the unit will remain powered on in standby.
To resume normal operation, simply turn a knob or press a button on the unit
or remote control.
To prevent automatic shut-off, an audio signal should remain active at a
moderate volume level from the XLR Input, the Aux Input, the USB/SD media
player, the Radio, or a Bluetooth connection. We recommend setting audio
source (i.e., Aux Input or Bluetooth) volume at max and the Master Volume to 5
or higher to prevent shut-off. To prevent automatic shut-off when using the
microphone by itself, connect to the XLR Input, set the Aux Input Volume to
max, and then adjust the Master Volume until the microphone is heard.
Pairing a Bluetooth Device
-
Turn on your Bluetooth device.
-
Power on Total PA Supreme.
-
Use the Mode button to select Bluetooth as the audio source, which appears as “bt” in the display. Total PA Supreme will automatically go into pairing mode to search for Bluetooth devices. You will know you are in pairing mode when the Bluetooth icon is flashing. In addition, automatic voice prompts from the speaker will alert you of the device’s status: Bluetooth Pairing, Bluetooth Connected, or Bluetooth Disconnected.
-
Navigate to your Bluetooth device’s setup screen, find Total PA Supreme, and connect. The Bluetooth icon will remain solidly lit.
Note: Users should consider updating their device’s OS if experiencing trouble with pairing or playing music. -
To disconnect pairing, turn off Bluetooth on your device or select Forget this device on your Bluetooth device’s setup screen. If you would like to disable (or enable) the voice prompts, press and hold the Play/Pause button on the Media Panel.
Note: Bluetooth must be selected as the audio source in order to disable (or enable) the voice prompts.
Linking Two Speakers
To wirelessly link two Total PA Supreme speakers:
- Power on both speakers using their Power Switches.
- With no Bluetooth connected, press the Mode button on one Total PA Supreme to select Bluetooth as the audio source, which appears as “bt” in the display. This will be the “secondary” speaker.
- Press the Link button on a second Total PA Supreme to enter Stereo Link Mode. This will be the “primary” speaker.
- Wait up to 1 minute for the speakers to make the connection. Once the two speakers are linked, press the Mode button on the “primary” speaker to select the desired audio source. Use the directions above to connect your Bluetooth device.
- To disconnect, double-press the Link button on the “primary” speaker.
Technical Specifications
Drivers:
Low-Frequency: 15.0” / 381 mm woofer
High-Frequency: 1.0” / 25 mm tweeter
Crossover: 2.2 kHz
Frequency Response: 55 Hz – 20 kHz (+ 3 dB)
Output Power: 500 W (peak)
Bluetooth:
Profile: A2DP, AVCTP
Module: Bluetooth 5.0
Bluetooth Range: Up to 100 ft. (30.5 m) (Bluetooth range is affected by walls,
obstructions, and movement. For optimal performance, place the product in the
center of the room so it is unobstructed by walls, furniture, etc.)
USB Charging Port: +5 V, 1 A
USB/SD:
Supported File System: FAT32
Supported File Types: MP3
Max. File Size: < 64 GB
Max. Device Capacity: < 64 GB
Power:
Connection: IEC
Input Voltage: 100–120 VAC, 60 Hz
Dimensions (DxWxH): 15.1″ x 17.8″ x 27.6″ / 382.4 x 452 x 701.5 mm
Weight: 43.5 lbs. / 19.75 kg
Safety & Warranty Information
For complete warranty information: ionaudio.com/warranty
Important Safety Instructions
-
Read these instructions. Keep these instructions. Heed all warnings. Follow all Instructions.
-
Do not use this apparatus near water.
-
Do not block any ventilation openings (if applicable). Install in accordance with the manufacturer’s instructions. Do not install this equipment in a confined or “boxed-in” space such as a bookcase or similar unit, and maintain good ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place exposed flame sources such as lighted candles on the apparatus.
-
Do not defeat the safety purpose of the polarized or grounding-type plug (if applicable). A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachment/accessories specified by the manufacturer.
-
Use only the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus (if applicable). When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Internal/External Voltage Selectors (if applicable): Internal or external voltage selector switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself.
-
Power Sources (if applicable): This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.
-
Caution: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (a battery pack or an installed battery) shall not be exposed to excessive heat such as sunshine, fire, etc.
-
(If applicable) Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
-
Warning (if applicable): Provide an earthing connection before the mains plug is connected to the mains. When disconnecting the earthing connection, be sure to disconnect it after pulling the mains plug out from the mains.
-
For Class II apparatus only (if applicable): This symbol means the equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to the electrical earth.
-
Class II Wiring (if applicable): To reduce the risk of electric shock, the external wiring connected to the terminals with “Class II Wiring” requires Class II wiring installed by an instructed person or the use of ready-made leads or cords.
-
This apparatus is for professional use only. Intended operational climate: moderate.
-
(If applicable) When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Be careful not to damage the power cord.
Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer. -
Warning (if applicable): Excessive sound pressure (high volumes) from headphones can cause hearing loss.
-
Warning (if applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product.
-
Warning (if applicable): Terminals marked with the lightning bolt symbol may be of sufficient magnitude to constitute a risk of electric shock.
-
Minimum distances 10 mm around the apparatus for sufficient ventilation.
Safety Notices
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER.
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL ONLY.
DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within the
equilateral triangle is intended to alert the user to the presence of un-
insulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
INSTRUCTIONS: The exclamation point within the equilateral triangle is
intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying this
appliance.
WARNING: To reduce the risk of fire or electrical shock, do not expose
this appliance to rain or moisture. Electrical equipment should NEVER be kept
or stored in damp environments.
NOTICE CONCERNING FCC REGULATIONS: You are cautioned that changes or
modifications not expressly approved by the part responsible for compliance
could void the user’s authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: (a) reorient or relocate the receiving antenna; (b) move
this unit; (c) increase the separation between the equipment and receiver; (d)
connect the equipment into an outlet on a circuit different from that to which
the receiver is connected; (e) be sure that all cables are properly shielded,
using a choke or ferrite where appropriate; (f) consult the dealer or an
experienced radio/television technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement : This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 cm
between the radiator and your body.
Disposal of Batteries (if applicable):
- Never dispose of any types of batteries in fire or near excessive heat or direct sunlight. Overheated batteries can rupture or explode.
- If you are unsure of how or where to dispose of a battery, refer to your local ordinances for the proper location, method, etc.
- Alkaline batteries & lithium button cell batteries: You can safely dispose of alkaline and lithium button cell batteries with normal household waste. They do not pose a health or environmental risk during normal use or disposal. (Alkaline batteries are composed primarily of common metals like steel, zinc, and manganese.)
Do not dispose of large amounts of alkaline or lithium button cell batteries in a group. Used batteries are often not completely “dead.” Grouping them together can bring these “live” batteries into contact with one another, creating safety risks. To avoid this, insulate each battery with tape or other nonconductive material to ensure it does not discharge. Proven cost-effective and environmentally safe recycling processes are not yet universally available for alkaline and lithium button cell batteries. Some communities offer recycling or collection of these batteries. For more information, refer to your local ordinances or contact your local government.
- Lead-acid batteries: Dispose of lead-acid batteries by bringing them to an electronic waste center or recycling center, or dispose of them in accordance with your local ordinances. (Rechargeable lead-acid batteries are the same type used in automobiles and should be disposed of in a similar fashion.)
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development (ISED) Canada’s license- exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Service Instructions
- Disconnect power cord before servicing.
- Replace critical components
only with factory parts or recommended equivalents. - For AC line powered units: Before returning repaired unit to the user, use an ohmmeter to measure from both AC plug blades to all exposed metal parts. The resistance should be more than 2,000,000 ohms.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>