n-FAB HPN2273CC-TX Podium Hoop Step Instruction Manual
- June 13, 2024
- n-FAB
Table of Contents
n-FAB HPN2273CC-TX Podium Hoop Step Instruction Manual
Components and Hardware
Tools for Installation
INSTALL
Step 1. Attach mounting bracket (x3) (# 7) to (#1) driver side step and
loosely secure with (x6) (#5) M10 carriage bolt and (x6) (#6) flanged hex nut.
Step 2. Attach mounting bracket (x3) (#8) to (#2) passenger side step and
loosely secure with (x6) (#5) M10 carriage bolt and (x6) (#6) flanged hex nut.
(Driver side shown)
NOTE: Brackets will attach to the back side of the welded flange with
threaded part of bolt facing towards the rear of the vehicle.
Step 3. Carefully raise Podium step up into position aligning brackets
with OE threaded studs and secure with (x6) (#3) M8 hex nut and (x6) (#4) M8
flat washer and hand tighten for now.
Step 4.After finial adjustment, tighten (X3) (#7) upper mounts at (18-20
ft/lbs) of torque.
Step 5. Finish by tightening the (x3) (#7) brackets at the main tube at
(32-37 ft/lbs) of torque.
Step 5. Repeat prcess with passenger side.
NOTE: Brackets are slotted for easier install
References
- Fab | A Digital Asset Marketplace for Content Creators
- N-Fab Steps, Running Boards & Accessories | RealTruck
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>