GALENVS Plasmid Miniprep Kit User Guide
- June 3, 2024
- GALENVS
Table of Contents
GALENVS Plasmid Miniprep Kit User Guide
Features
Installation instruction
-
Remove the protective foil.
-
Resuspend bacterial pellet in 200µl of Resuspension Buffer then add to Lysis Buffer (columns 1 and 7).
-
Place plate into the miQron, taking care that the label is facing outward.
-
Insert two combs.
-
Select the PM Kit protocol and press
-
At Stop 1, add 100µl of Neutralization Buffer to columns 1 and 7.
Place plate back in miQron and continue the program. -
At Stop 2, add 400µl of Binding Buffer to columns 1 and 7.
Place plate back in miQron and continue the program.
When program is complete, discard combs then remove plate from miQron.
Columns 5 and 11 contain the purified DNA elution.
PMKit miQron protocol parameters
Step Name| Column| Volume (p1)| Time (sec)| Mixing Speed (1-10)| Dry Time
(sec)| Magnet Capture Time (sec)
---|---|---|---|---|---|---
Lysis| 1 & 7| 400| 480| 3| 0| n/a
Stop 1- Neutralization| 1& 7| 500| 120| 5| 0| 75
Discard MNP| 2 & 8| 600| 12| 10| 0| n/a
Stop 2- Binding| 1& 7| 900| 60| 5| 0| 50
Wash #1| 3 & 9| 600| 60| 5| 0| 50
Wash #2| 4 & 10| 600| 60| 5| 60| 50
Elution| 5 & 11| 50| 60| 5| 0| 50
Discard MNP| 2& 8| 600| 6| 10| 0| 0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>