GALENVS PD0016-12 Plant DNA Extraction Kit User Guide
- June 3, 2024
- GALENVS
Table of Contents
PD0016-12 Plant DNA Extraction Kit
User Guide
PD0016-12 Plant DNA Extraction Kit
PDKit miQron protocol parameters
Step Name| Column| Volume
( μl)| Time
(sec)| Mixing Speed
(1–10)| Dry Time
(sec)| Magnet Capture
Time (sec)
---|---|---|---|---|---|---
Binding| 1 & 7| 650| 300| 7| 0| 150
Wash #1| 2 & 8| 600| 60| 7| 0| 90
Wash #2| 3 & 9| 600| 60| 7| 0| 90
Wash #2| 4 & 10| 600| 60| 7| 300| 90
Elution| 5 & 11| 100| 60| 10| 0| 150
Discard Comb| 2 & 8| 600| 0| 5| 0| 0
-
Add up to 50mg of plant leaves sample to the lysis bead tube provided.
-
Add 600μl Lysis Buffer, 60μl PPB, and 5μl RNase.
Mix for 3 mins using TissueLyser at max speed or vortex for 10 mins; then centrifuge at 20,000g for 2 mins. -
Remove the protective foil.
-
Avoiding pellets, transfer up to 300-400μl of supernatant to Binding Buffer (Columns 1 & 7).
You can add up to 16 samples. -
Place plate into the miQron, taking care that the label is facing outward.
-
Insert two combs.
-
Select the PDKit protocol and press When program is complete, remove plate from miQron and discard combs.
Columns 5 and 11 contain the purified DNA elution. PD Plant DNA Extraction Kit
PD0016-12
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>