JL AUDIO CF-350mt 3.5 Inch Mid Tweeter Speaker System Owner’s Manual
- June 1, 2024
- JL AUDIO
Table of Contents
CF-350mt
Custom Fit – 3.50 in / 90 mm Mid-Tweeters
CF-350mt 3.5 Inch Mid Tweeter Speaker System
IMPORTANT:
- Installation requires appropriate tools and safety equipment. Professional installation is recommended.
- Before installation, turn off the audio system and disconnect the battery system from the audio system.
- Before cutting or drilling, check for potential obstacles behind mounting surfaces.
- Do not mount this product in an engine compartment or other area of extreme heat.
- Mount this product securely to prevent damage or injury in severe conditions.
Listen to your audio system at levels appropriate for operating conditions and
hearing safety.
| CF-350mt
---|---
| 35 W
| 10 – 50 W
| 86.0 dB @ 1W/1m
| 450 Hz – 20 KHz ± 3 dB
| 450 Hz
| 4 Ω
Product images shown are for illustrative
purposes only and may differ from the actual product. Due to continuous
product development, all specifications are subject to change without
notice.
WARNING! These speakers must be used
with an appropriate high-pass crossover filter, like those supplied in this
kit, or actively filtered: 12 dB/octave at 450 Hz. Failure to use an
appropriate filter will result in damage or failure of the product and will
NOT be covered under warranty.
Printed in China • © 2023 • JL Audio is a trademark of Garmin Ltd. or its
subsidiaries and is registered in one or more countries, including the U.S.
The JL Audio logo is a trademark of Garmin Ltd. or its subsidiaries.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>