Roav SmartCharge T2 R5114 User Manual

: June 2, 2024
: Roav

USER MANUAL

Roav SmartCharge T2 R5114

Roav SmartCharge T2 R5114

Safety Instructions

SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for Roav SmartCharge T2 car charger (Model R5114).

Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, the warranty does not apply.

Read all instructions and cautionary markings before using this product.
Do not expose to rain, moisture, or snow.
Use of attachments not recommended or sold by the manufacturer may result in a risk of fire, electric shock, or injury to persons.
Do not operate this car charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person.
Do not disassemble this car charger; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
To reduce the risk of electric shock, unplug this car charger before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
To reduce the risk of fire or electric shock, do not interconnect output terminations.
Avoid long exposure to direct sunlight, which may cause damage to the device.
Exposing this product to open flames may cause it to explode.
Do not use this product in strong magnetic fields.
Use a soft, dry lint-free cloth to clean. Do not use any corrosive cleaner or oil to clean.
CAUTION – For continued protection against fire risk, replace only with the same type and rating of fuse. The fuse rating is 32V DC / 7A.
Always obey traffic laws and pay attention to the road. Do not attempt to use this device while driving as some features are limited while the vehicle is in motion. Failure to pay full attention to the operation of your vehicle could result in death, serious injury, or property damage. You assume total responsibility and risk for using this device.

Introduction

Roav SmartCharge T2 R5114

At a Glance

At a Glance Function

Press previous and next button simultaneously for 3 seconds to restore default settings.

LED Indication

Getting Started

Plug Roav SmartCharge T2 into your vehicle’s cigarette lighter socket.

Plug Roav SmartCharge

Start your vehicle’s engine. The LED display will light up, and BT/ FM frequency will flash alternately.
Enable Bluetooth on your smartphone and search for available Bluetooth devices. Select “Roav T2_XXXX” and connect. Once successfully connected, the FM frequency will be displayed.

Enable Bluetooth

Customizing FM Channel

The Roav SmartCharge T2 allows you to connect your phone to your car’s stereo via an FM signal.

Press CH. T2 begins to search for an unoccupied FM frequency. Or select the channel manually: Press and hold CH for one second. FM mode is activated. Press to select an FM frequency.
Turn on your car radio. Make sure the transmitting frequency matches the frequency T2 is tuned to.

Turn on your car radio

Using the Car Charger T2

Play Music

When T2 is successfully paired with your smartphone, you can play music from your phone. Music can then be streamed to your car’s audio system via an FM transmitter or AUX-Out socket.

Play Music

To further reduce echo and cabin noise on your calls and music, you can connect a 3.5 mm AUX cable (not provided) to T2’s AUX-Out socket and the AUX- In socket of your car’s audio system.

connect a 3.5 mm AUX cable

Note: If Bluetooth is not connected within 30 minutes, T2 will enter sleep mode and stop emitting FM signals. Then you will listen to the local channel with the LED display shut off.

When Bluetooth is re-connected, T2 will be activated and resume operation.

Make Hands-Free Calls

When T2 is successfully paired with your smartphone, you can enjoy convenient hands-free calling.

Make Hands-Free Calls

Charging Your Devices

Note: Roav SmartCharge T2 has one USB-A and one USB-C charging port. You can charge two devices simultaneously with a maximum output of 30W.

Charging Your Devices

Specifications

Specifications are subject to change without notice.

DC input: 12V – 24V
USB-C output: 5V 3A, 9V 2A
USB-A output: 5V 2.4A
Bluetooth: V5.0
Bluetooth transmission distance: 10 m / 393.7 in
FM frequency range: 88.1 – 107.9 MHz
FM transmission range: 2 m / 78.7 in
Operating temperature range: -4°F to 104°F / -20°C to 40°C
Storage temperature range: -40°F to 185°F / -40°C to 85°C

Notice

EU standards This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit: www.goroav.com.

This product can be used across EU member states. The product shall only be connected to a USB Interface of version 2.0 or higher.

The device complies with RF specifications when the device used at 20 mm from your body.

BT Operating Frequency Range: 2402-2480 MHz; BT Max Output Power: 8 dBm.

The following importer is the responsible party (contact for EU matters only).

Importer: Anker Technology (UK) LtdImporter

Address: Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom

This product is designed and manufactured with high quality materials and components, which can be recycled and reused.

Not Treated as household waste This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the
environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including
interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the
equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed / mobile exposure condition. The min separation distance is 20cm.

The following importer is the responsible party:
Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga , CA 91730, USA
Telephone: 1-909-484-1530

IC Statement

This device complies with Industry Canada license- ICES-003. Operation is subject to the following two conditions:

This device may not cause interference, and
This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

IC RF Statement:

When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.

Trademark

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.

Google Play and the Google Play logo are trademarks of Google Inc.