ROBUS RTI1330-25 TIBO 13W LED Brick Light 3000K Instruction Manual
- June 6, 2024
- ROBUS
Table of Contents
ROBUS RTI1330-25 TIBO 13W LED Brick Light 3000K
PLEASE READ THE INSTRUCTIONS BEFORE COMMENCING INSTALLATION AND RETAIN THEM FOR FUTURE REFERENCES. Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or use of this product, consult a competent electrician
Note: Product technical information and specification may change over time without prior notification. For the latest technical information please visit our web site www.robus.com or robusdirect.com -20°C < Ta < +40°C, 220-240V ~ 50/60Hz, Class I, IP65 Luminaire is non-dimmable
Installation
- Ensure mains supply is switched off before commencing installation.
- Check for the location of buried cables before making recess and fitting sleeve. In the recess, the front edge of the sleeve should be set back about 1mm from the wall face.
- Cut-out recess for the sleeve as per diagram.
- Set mounting sleeve in recess. Allow the compound to set.
- Remove back case and cable grip.
- Introduce supply cables.
- Connect supply terminals: Live – Brown, Neutral – Blue, and Yellow/Green – Earth.
- Secure cables using cable grip.
- Attach back case, ensure all 4 screws are tight.
- Attach fitting to mounting sleeve, ensure it is tight against the surface.
Market Surveillance: LS Code of energy efficiency Class E. RTI1330-LS Disconnect driver input and output connections. Remove LED plate
Information for the Product user:
- Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed-out wheelie bin symbol).
- Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection center for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
- This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
- The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations
The Installation must be carried out by a qualified electrician
