ROBUS RAMSUS-6W 6 Wire Suspension Kit For Atmos 1200×600 Panel Instruction Manual
- June 4, 2024
- ROBUS
Table of Contents
ROBUS RAMSUS-6W 6 Wire Suspension Kit For Atmos 1200×600 Panel
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.
- Electrical products can cause death or injury, or damage to property.
- If in any doubt about the installation or use of this product, consult a competent electrician
Note:
Product technical information and specification may change over time without prior notification. For the latest technical information please visit our web site www.robus.com or robusdirect.com
Installation
- Ensure mains supply is switched off before commencing work
- Choose a suitable location for the panel
- Mark fixing positions on the ceiling, before cutting to ensure that the holes do not impinge on joists, pipework, cables or other building services.
- Attach base of the suspension kit to the ceiling using the screws provided, and ensure that they are secure.
- Attach suspension wire to base and screw in tight
- Attach the six brackets to the two sides of the panel, ensuring that they are secure.
- Attach suspension wire hook to the triangle on six plates.
- Adjust the length of the suspension wire by pressing the nipple on top of the panel support, and ensure that all four wires are equal (tie up excess wire)
- Connect the supply to the driver
Note : The drivers and connector must be fixed to the back of the LED panel by adhesive tape
Information for the Product user
- Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed out wheelie bin symbol).
- Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
- This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
- The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations
The Installation must be carried out by a qualified electrician
L.E.D lighting & Electrical Distribution Group UC
IRE : Nangor Road, Dublin 12, D12 E7VP, Ireland
UK : Bracknell Enterprise & Innovation Hub, Ocean House, 12th Floor, The
Ring, Bracknell, Berkshire RG12 1AX, UK
Tel : +353 1 7099000
Fax : +353 1 7099060
Email : info@robus.com
Website : www.robus.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>