Kapvis 2BGMC-MBT Smart Music Boxing Target Instruction Manual
- June 21, 2024
- Kapvis
Table of Contents
Kapvis 2BGMC-MBT Smart Music Boxing Target
Product Information
- Origin: China
- Components: Speaker, Type-C charging port, Hitting area, Mounting bracket
- Key Functions: Music playback, Power on/off, Automatic shutdown
- Connectivity: Bluetooth for mobile phone connection
- Charging: Wireless charging support
Product Usage Instructions
Key Function Operation:
- Short press the button to turn on the device and play music.
- Press and hold the button for 2-3 seconds to turn off the device.
- The device will automatically shut down after 3 minutes of inactivity.
Mobile Phone Connection:
- Activate Bluetooth on your phone and search for devices.
- Select GDBX when it appears to pair with the Bluetooth audio system.
- Upon successful pairing, your phone will display a connection confirmation.
Wireless Charging Usage:
Insert the charger to activate wireless charging automatically.
Installation Instructions: Installation Way 1:
- Place the EVA sticker in the middle where the bracket is located and install the bracket.
- Secure the bracket to the wall using screws.
- Ensure firm installation before using the product.
Installation Way 2:
- Apply the EVA sticker to the back of the product following the provided instructions.
- Stick the product firmly on the wall once aligned correctly.
Installation Way 3:
- Attach the hook and loop fasteners to the back of the product using glue.
- Stick the product securely on the wall after aligning it with the fasteners.
FAQ:
Symptoms and Causes:
Symptoms | Cause Analysis | Method of Exclusion |
---|---|---|
No lights and no sound | The product is not powered on | Short press the switch |
Lights flicker | Battery drain or low battery | Charge |
Short press the switch cannot turn on | Main chip capacitor short of power |
Charge and restart
Banging sound inside the device| Internal active stress structure issue|
Normal phenomenon
FCC Statement:
This device complies with part 15 of FCC Rules. It must not cause harmful
interference and should accept any received interference.
RF Exposure Information:
The device meets general RF exposure requirements and can be used without
restrictions in portable exposure conditions.
PRECAUTIONS
- Please fix this product on a strong and reliable wall. When hitting, please hit within the hitting area. It is strictly forbidden to hit the corner area to avoid hand injury or equipment damage.
- This product is suitable for adults. Children should use it under adult supervision.
- Beginners should not hit too hard to avoid hand injuries. Pay attention to safety first during exercise, and leg and knee strikes are strictly prohibited.
- It is strictly prohibited to hit the speaker area.
- If the device cannot be turned on or has abnormalities, please check whether the battery is too low and charge it in time. The charging time should not exceed 8 hours. If it is not used for a long time, it is recommended to charge it once every 1-2 months.
- This product is not waterproof. When wiping the boxing target, use a dry cloth and do not get it wet.
- Please keep the instructions properly for emergency use.
PRODUCT
- Speaker
- Type-C charging port
- Hitting area
- Mounting bracket
INSTRUCTION FOR USE
Key Function Operation Instructions:
- Short press the button to turn on the device, the light will be on, and the music will play.
- On pressing the button for 2-3 seconds, the device is turned off.
- If there is no operation about 3 minutes after booting successfully the device will automatically shut down.
Mobile Phone Connection:
- Step 1: Enable Bluetooth in phone settings and search for devices.
- Step 2: When “GDBX” appears, the phone has detected the Bluetooth audio system. Click “GDBX” to enter pairing mode. Once successfully paired, the phone displays a successful connection.
Wireless Charging Usage:
Insert the charger to activate wireless charging automatically.
INSTALLATION
Installation Way 1:
- Put the EVA sticker in the middle where the bracket is placed, then tear it off and install the bracket.
- First, fix the No. 2 and No. 3 holes of the bracket with the 2 holes on the back of the boxing target with flat head screws.
- Draw the No. 1 and No. 4 holes of the bracket on the wall, drill the holes with an impact electric drill, and fix them on the wall with expansion screws.
- Before using the product, please make sure the installation is firm.
Installation Way 2:
- First, tear off the double-sided tape on the upper half of the EVA.
- The EVA paste is aligned on the back of the product.
- Tear off the double-sided tape on the lower half of the EVA sticker.
- Put it in place and stick it firmly on the wall.
Installation Way 3:
- Align and paste the hook and loop fasteners with glue on the back of the product.
- Peel off the double-sided tape on the top half.
- Align the position with the wall and stick it firmly.
Troubleshooting
NO.
| Symptoms| Cause Analysis|
Method of exclusion
---|---|---|---
1| No lights and no sound| The product is not powered on| Short press
the switch
2| No lights and no sound| Battery drain| Charge
3| Lights flicker| Low battery| Charge
4| Short press the switch can not turn on| The main chip capacitor is
short of power due to long-term non- startup| Repeatedly short-press the
switch
5| A banging sound inside the device| Issued by the internal active
stress structure| Normal phenomenon
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by the
manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>