WATERWARE QUTU13BE Tussock Concrete Basin Instruction Manual
- August 19, 2024
- WATERWARE
Table of Contents
WATERWARE QUTU13BE Tussock Concrete Basin
CARE AND MAINTENANCE
Our basins are unique with the colour sealed finish giving them good water tolerance, enhancing the colour and protecting the sink from wear, but it’s not invincible. It is best practice that you1 avoid the use of abrasive cleaners, soaps or harsh scrubbers that could potentially wear down the sealer. We recommend using mild, non abrasive, non ammonia, non-acidic cleaners.
General cleaning is best done using a soft cloth and a mild soap of neutral pH. It is recommended to apply a wax to maintain the concrete sink every 6 months, especially in areas that are prone to lime scale.
YOUR WALL MOUNT SINK KIT WILL CONTAIN
-
Concrete Basin x 1
-
Drainer x 1
-
Expansion screws x 3
Installation Instruction
-
Drill bolt holes on t he wall using the basin as the template.
Secure bolts to the wall using a wrench, and apply glue to the back of the basin. -
Slide the basin onto bolts through the hole on the back of the basin, adjust the position to ensure level, and then secure and lock into position with the nuts.
-
Thread the drainer through the waste hole in the basin and tighten with locking nut
-
After installing the basin, wait for the glue to dry before connecting waste pipework and tapware.
CUSTOMER SUPPORT
waterware.co.nz
info@waterware.co.nz
0800 WATERWARE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>