ROBUS SPCS-001 Tripod Adapter and Stand User Manual

June 5, 2024
ROBUS

ROBUS SPCS-001 Tripod Adapter and Stand

Thank you for choosing Robus

The Robus SPCS-001 is a versatile solution for mounting a smartphone on any accessory with a 1/4-20 or 3/8-16 stud, such as a tripod, tripod head, or monopod. The smartphone clamp is compatible with smartphones up to 4 inches wide, and the clamp’s upper and lower jaws are adjustable for a perfect fit. Mounting options include 1/4-20 and 3/8-16 sockets that are compatible with most tripods. The Arca-type base is compatible with most tripod heads with Arca-style quick release clamps. Several 1/4-20 accessory sockets are placed around the adapter for adding your favorite accessory, and there is an integrated cold shoe for camera-mount accessories. When it’s not mounted on a tripod, the desktop stand converts the adapter into a stand-alone smartphone stand.

Overview[

ROBUS SPCS-001 Tripod Adapter and Stand fig
1](https://manuals.plus/wp-content/uploads/2022/07 /ROBUS-SPCS-001-Tripod-Adapter-and-Stand-fig-1.png)

  1. Fine-tune adjustment knob
  2. 1/4-20 accessory socket
  3. Ballhead
  4. Ball joint lock
  5. 90° notch (×3)
  6. 1/4-20 accessory socket (×2)
  7. Quick-release lock
  8. Arca-type base
  9. 1/4-20 and 3/8-16 mounting sockets
  10. Desktop stand
  11. Cold-shoe mount and 1/4-20 accessory socket

Attaching a Smartphone[](https://manuals.plus/wp-content/uploads/2022/07

/ROBUS-SPCS-001-Tripod-Adapter-and-Stand-fig-2.png)

  1. Loosen the fine-tune adjustment knob a few rotations.
  2. Loosen the quick-release lock, and widen the clamp.
  3. Insert your phone into the clamp. Then close the clamp, and tighten the quick-release lock.
  4. Tighten the fine-tune knob until snug. Be careful not to overtighten.

Aiming

Loosen the ball joint lock to aim the smartphone or change orientation. When it’s in position, tighten the lock until secure. Use the notches to change the direction by 90°.

Mounting Instructions

Tripod
Use the bottom 1/4-20 or 3/8-16 socket to screw the adapter onto the tripod’s mounting stud.

Tripod Head
Fit the Arca-type base into the head’s Arca-style clamp, and tighten the clamp until secure.
Note: Arca plates have varying dimensions. Make sure the base fits the clamp and is securely tightened before you proceed.

Desktop
Unfold the desktop stand, and place the adapter onto a flat and even surface.

Specifications

  • Compatibility Devices 2.6 to 4 in. (6.6 to 10.2 cm) wide
  • Connectors 1/4-20 mounting socket
    • 3/8-16 mounting socket
    • Arca-type base
    • Cold shoe
    • 1/4-20 accessory socket
  • Load Capacity 4.4 lb. (2 kg)
  • Dimensions
    • Width: 1.5 in. (3.8 cm)
    • Depth: 2.5 in. (6.3 cm)
  • Weight 5.5 oz. (156 g)

Five-Year Limited Warranty

This Robus product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of five (5) years from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. The Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Robus Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Robus along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.robussupports.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group. www.gradusgroup.com
Robus is a registered trademark of the Gradus Group. © 2022 Gradus Group LLC. All Rights Reserved. Images are for illustrative purposes only.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

ROBUS User Manuals

Related Manuals