ROBUS RDKX06CCT3-01 Duke2 4 Wattages Selectable LED Batten Instruction Manual
- June 3, 2024
- ROBUS
Table of Contents
RDKX06CCT3-01 Duke2 4 Wattages Selectable LED Batten
Instruction Manual
RDKX06CCT3-01 Duke2 4 Wattages Selectable LED Batten
L DUKE2 4 WATTAGES SELECTABLE LED BATTEN IP20 2FT/4FT/5FT WHITE CCY3
SELECTABLE
RDKX06CCT3-01 RDKX12CCT3-01 RDKX15CCT3-01
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE
REFERENCES.
Electrical products can cause death or injury, or damage to property. The
Installation must be carried out by a qualified electrician.
Note: The luminaire must be disconnected before carrying out any
insulation resistance testing. Product technical information and specification
may change over time without prior notification. For the latest technical
information please visit our web site www.robus.com.au and www.robusled.co.nz
-25°C < Ta < +40°C, 220-240V ~ 50/60Hz, Class I, IP20
Luminaire is non-dimmable. Complies with the emergency pack (RHA2WEMSTA-PSU)
to achieve the duration 90 minutes emergency.
Installation
-
Ensure mains supply is switched off before commencing work.
-
Select suitable location for luminaire.
-
Safety note! The power supply cord must not be exposed to mechanical damage.
-
Disassemble the fitting base from the fitting (as per fig. 2 & 3).
-
Mark appropriate fixing hole positions on wall based on the fitting base, check location of buried cables, pipes and other building services before drilling.
-
Drill holes in the wall and insert the wall plugs. And feed supply cables through cable entry hole and attach base to wall (as per fig.4).
-
Connect supply: Live/Brown to SL, Neutral/Blue to N and Yellow/Green to E.
-
Move switch on the metal tray to select colour temperature. And then choose the wattage on the driver via DIP switch.
WARNING: DO NOT CHANGE SETTING WHEN THE FITTING IS ON! -
Refit the front diffuser to the base and screw it firmly using one screw.
-
Press down the tabs to the reset position on the ends of fitting and ensure that it fits securely.
Note: This luminaire has no user serviceable parts. If damaged, disconnect from mains and discontinue use.
LED Group Australia Pty Limited
Suite B, 2 Pittwin Road ,,,,,,,,,,,,,,,,,,,Tel: 07 3890 5444
Capalaba,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, Fax: 07 3890 4777
Queensland 4157
Email: [email protected]
Australia Website: www.robus.com.au
LED Group
Crowe Horwath Tel: +64 3668 5285
**** 72 Trafalgar Street
Email: [email protected]
NELSON 7010
Website: www.robusled.co.nz
New Zealand
References
- ROBUS: Home to Best-in-Class LED Lighting and Customisation | ROBUS
- ROBUS: Home to Best-in-Class LED Lighting and Customisation | ROBUS