LeapFrog 91-003428-001 Magnetic Letter Set User Guide

LeapFrog 91-003428-001 Magnetic Letter Set

INTRODUCTION

Thank you for purchasing Tad’s Fridge Phonics™! This interactive toy introduces your child to the letters of the alphabet as well as the sounds they make. Playing with the letter tiles also exercises you child’s fine motor skills and helps them develop a sense of the shape of each letter. Three photo frames can be customized with your own photos and images!

INCLUDED IN THIS PACKAGE

• One Tad’s Fridge Phonics™
• 26 letter tiles
• Three photo frame tiles
• One parent’s guide

WARNING:

All packing materials, such as tape, plastic sheets, packaging locks, removable tags, cable ties and packaging screws are not part of this toy, and should be discarded for your child’s safety.

ATTENTION:

For your child’s safety, get rid of all packaging products such as adhesive tapes, sheets of plastic, ties, labels and packaging screws. They don’t do not part of the toy.

NOTE:

Please keep this parent’s guide as it contains important information.

Unlock the packaging locks:

1. Rotate the packaging locks 90 degrees clockwise.
2. Pull out the packaging locks and discard.

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit.
3. Use a screwdriver to loosen the screw and open the battery cover.
4. Install 3 new AAA (AM-4/LR03) batteries into the battery box as illustrated. (The use of new alkaline batteries is recommended for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.

BATTERY NOTICE

• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if removable).
• Rechargeable batteries are only to be charged under adult supervision.

PRODUCT FEATURES

1. Off/Low/High Volume Switch
   Slide the Off/Low/High Volume Switch from the Off position to Low or High volume to play.

2. Level Selector

   • Select Level 1 to hear the letter name
   • Select Level 2 to hear the letter name, a word that begins with that letter and a fun alliterative phrase starting with that letter
   • Select Level 3 to hear a phonics song featuring the letter name and letter sound

3. Light-Up Music Button
   Press the Light-Up Music Button to hear two songs that reinforce alphabet learning and phonics skills.

4. 26 Letter Tiles
   Place a Letter Tile into the Letter Slot and press down to hear the letter name, letter sound, a phonics song, and words that start with that letter.

5. Three Photo Frame Tiles
   Insert your own photos or images into the Photo Frame Tiles. Then place these tiles into the Letter Slot to hear phrases such as, “Rock Star Daddy!” and “Super Sweet Mama!

CARE & MAINTENANCE

1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat sources.
3. Remove the batteries when the unit is not in use for an extended period of time.
4. Do not drop the unit on a hard surface and do not expose the unit to excess moisture.

TROUBLESHOOTING

If for some reason the program/activity stops working, please follow these steps:

1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit back ON. The unit will now be ready to play again.
5. If the unit still does not work, replace with an entire set of new batteries.

Environmental phenomena.

The unit may malfunction if subjected to radio-frequency interference. It should revert to normal operation when the interference stops. If not, it may become necessary to turn the power OFF and back ON, or remove and reinstall the batteries. In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to reset the device by removing and reinstalling the batteries.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

WAENING This product contains inaccessible magnets. Should the toy break or magnets ever become exposed, remove the toy from use. Magnets should not be eaten or inhaled. Swallowed magnets can stick together across intestines causing serious infections and death. Seek immediate medical attention if magnets are swallowed or inhaled.

CAUTION

This product contains strong magnets. Keep product 6” (15 cm) away from pacemakers, and avoid contact with:

• Magnetic computer media, including floppy disks, zip disks, removable hard disk drives.
• Televisions and computer video monitors.
• Magnetic media, including audio cassette tapes, video cassette tapes, credit cards, ID badges, etc.
• Audio tape recorders.
• Iron filings and other ferrous-metal shavings/particles.
• Pointed objects of ferrous material, such as nails, screws, carpet tacks, etc.
• May scratch painted or magnetic surfaces.

Use this template to cut your own photos to the correct size for the photo frames.

IMPORTANT NOTE:

If the problem persists, please call our Consumer Services Department at 1-800-701-5327 in the U.S. or email support@leapfrog.com. Creating and developing LeapFrog® products is accompanied by a responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representative will be happy to help you.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. CAN ICES-3 (B)/NMB-3(B)

Customer Support

Visit our website for more information about our products, downloads, resources and more.
leapfrog.com 
For warranty information, please visit
leapfrog.com/warranty
LeapFrog Enterprises, Inc., a subsidiary of VTech Holdings Limited.
TM & © 2018 LeapFrog Enterprises, Inc.
All rights reserved.
91-003428-001

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>