ROBUS RGL14CCT3-01 Gleam 14W or 17W CCT Selectable Dimmable Surface Fitting IP54 White Instruction Manual
- June 3, 2024
- ROBUS
Table of Contents
GLEAM 14W/17W CCT SELECTABLE DIMMABLE
SURFACE FITTING IP54 WHITE
RGL14CCT3-01
RGL17CCT3-01
INSTRUCTION MANUAL
RGL14CCT3-01 Gleam 14W or 17W CCT Selectable Dimmable Surface Fitting
IP54 White
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION
AND RETAIN FOR FUTURE REFERENCES.
!Electrical products can cause death or injury, or damage to property. The
Installation must be carried out by a qualified electrician.
Note:
The luminaire must be disconnected before carrying out any insulation
resistance testing.
Product technical information and specification may change over time without
prior notification. For the latest technical information please visit our web
site www.robus.com.au and
www.robusled.co.nz
220-240V~50/60Hz, -20°C < Ta < +40°C, Class II, IP54
Suitable for mounting on a normally flammable surface.
See website for compatible dimmer list:
www.robus.com.au
Installation
-
Ensure mains supply is switched off before commencing work.
-
Ensure there is at least 100mm of free space around the luminaire location.
-
Rotate and remove the diffuser from the base as per fig2.
-
Mark appropriate fixing hole positions on wall or ceiling basing on the mounting bracket, check location of buried cables, pipes and other building services before drilling.
-
Drill holes in the ceiling and insert the wall plugs.
-
Feed the supply cables through the grommet on the cable entry hole.
-
Fix the base onto the ceiling using screws.
-
Remove the terminal cover and restraining bracket, and connect the AC power
supply cable to the terminal: Brown/Live to L and Blue/Neutral to N. -
Refit the terminal cover and restraining bracket.
-
Move the switch to select colour temperature: 3000K, 4000K or 5700K.
WARNING: DO NOT CHANGE CCT WHEN THE FITTING IS ON!! -
Refit the diffuser to the base.
Note: This product has no user serviceable parts. If any part is damaged, disconnect from mains and discontinue use.
LED Group Australia Pty Limited
Suite B, 2 Pittwin Road
Capalaba
Queensland 4157
Australia
Issue 1 200921| Tel: 07 3890 5444
Fax: 07 3890 4777
Email: purchases@robus.com
Website: www.robus.com.au| LED Group
Crowe Horwath
72 Trafalgar Street
NELSON 7010
New Zealand| Tel: +64 3668 5285
Email: nz_purchases@robus.com
Website: www.robusled.co.nz
---|---|---|---
References
- ROBUS: Home to Best-in-Class LED Lighting and Customisation | ROBUS
- ROBUS: Home to Best-in-Class LED Lighting and Customisation | ROBUS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>