ROBUS RCM9030AS-04, RCM9040AS-04 COSMIC 90W LED Flood Light Instructions

June 3, 2024
ROBUS

ROBUS RCM9030AS-04, RCM9040AS-04 COSMIC 90W LED Flood

ROBUS-RCM9030AS-04,-RCM9040AS-04-COSMIC-90W-LED-Flood-PRODUCT-
IMG

PLEASE READ INSTRUCTIONS BEFORE COMMENCING INSTALLATION AND RETAIN THEM FOR FUTURE REFERENCES.
Electrical products can cause death or injury, or damage to property.
If in any doubt about the installation or use of this product, consult a competent electrician

Note:
Product technical information and specification may change over time without prior notification. For the latest technical information please visit our web site www.robus.com or robusdirect.com

-20°C < Ta < +40°C, 220-240V ~ 50/60Hz, Class I, IP65 Luminaire is non-dimmable

Installation

ROBUS-RCM9030AS-04,-RCM9040AS-04-COSMIC-90W-LED-Flood-FIG-
\(1\) ROBUS-
RCM9030AS-04,-RCM9040AS-04-COSMIC-90W-LED-Flood-FIG-
\(3\)

  1. Ensure the mains supply is switched off before commencing work.

  2. Select a suitable location for the luminaire.

  3. Mark the wall with appropriate fixing positions. Before drilling, ensure that the hole does not impinge on pipe work, cables or other building services.

  4. Attach the luminaire and fix bracket by tightening the screws, then adjust to desired angle. Ensure that it is secure.

  5. The luminaire is supplied with 1m of rubber cable. Using suitable IP rated enclosure terminate Brown (Live), Blue (Neutral) and Green/Yellow (Earth) to switch supply.

  6. This product has no user-serviceable parts. If any part is damaged, disconnect from mains and discontinue use.
    Note: No “fixings screws provided’, please use appropriate fixing screws

  7. Projection Distance: 7.5m

  8. Max Width : 14 -17m

  9. Mounting Height: 5.5m – 8m

Market Surveillance : These products contain light sources of energy efficiency as detailed below.

  • RCM9030AS-LS: Class E
  • RCM9040AS-LS: Class D
  • Remove screws at the back the fitting. Open housing.
  • Remove LED PCB (LS) and Remove driver PCB (SCG

Specification

Information for the Product user

Installation

  1. Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed out wheelie bin symbol).
  2. Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for waste electrical equipment or a Civic
  3. Amenity site, or to a retail outlet from which you are purchasing a replacement.
  4. This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
  5. The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations

The Installation must be carried out by a qualified electrician

Bracknell Enterprise & Innovation Hub, Ocean House, 12th Floor, The Ring, Bracknell, Berkshire RG12 1AX, UK
Tel: +353 1 7099000
Fax: +353 1 7099060
Email: [email protected]
Website: www.robus.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ROBUS User Manuals

Related Manuals