ROBUS COSMIC 125W/170W LED Flood Light Instruction Manual
- June 3, 2024
- ROBUS
Table of Contents
ROBUS COSMIC 125W/170W LED Flood Light Instruction Manual
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE
REFERENCES.
Electrical products can cause death or injury, or damage to property.
If in any doubt about the installation or use of this product, consult a
competent electrician.
Note:
Product technical information and specification may change over time without
prior notification. For the latest technical information please visit our web
site www.robus.com or
robusdirect.com
20°C < Ta < +40°C, 220-240V ~ 50/60Hz, Class I, IP65 Luminaire is non-dimmable
Installation
- Ensure mains supply is switched off before commencing work.
- Select suitable location for luminaire.
- Mark wall with appropriate fixing positions. Before drilling, ensure that the hole does not impinge on pipe work, cables or other building services.
- Attach luminaire and fix bracket by tighten screws, then adjust to desired angle. Ensure that it is secure.
- The luminaire is supplied with 1m of rubber cable. Using suitable IP rated enclosure terminate Brown (Live), Blue (Neutral) and Green/Yellow (Earth) to switch supply.
- This product has no user serviceable parts. If any part is damaged, disconnect from mains and discontinue use.
Note: No “fixings screws provided’, please use appropriate fixing screws.
Market Surveillance: These products contain light sources of energy efficiency
as detailed below.
RCM12530AS-LS: Class D; RCM12540AS-LS: Class D
RCM17030AS-LS: Class D; RCM17040AS-LS: Class D
Remove screws at the back the fitting. Open housing.
Remove LED PCB (LS) and Remove driver PCB (SCG)”
| 125W| 170W
---|---|---
Projection Distance:| 9m| 10.5m
Max. Width:| 20 – 24m| 21 – 25m
Mounting Height:| 7 – 9m| 10 – 12m
Warning: Do not stare at the operating light source
Information for the Product user
- Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed out wheelie bin symbol).
- Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
- This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
- The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations.
The Installation must be carried out by a qualified electrician
L.E.D lighting & Electrical Distribution Group UC
IRE: Nangor Road, Dublin 12, D12 E7VP, Ireland
UK: Bracknell Enterprise & Innovation Hub, Ocean
House, 12th Floor, The Ring, Bracknell,
Berkshire RG12 1AX, UK
Tel: +353 1 7099000
Fax: +353 1 7099060
Email: info@robus.com
Website: www.robus.com
References
- robusdirect
- ROBUS: Home to Best-in-Class LED Lighting and Customisation - Robus
- ROBUS: Home to Best-in-Class LED Lighting and Customisation - Robus
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>