Pinolino 110032 Cot Bed Florian Instruction Manual
- June 5, 2024
- Pinolino
Table of Contents
Pinolino 110032 Cot Bed Florian
IMPORTANT
PLEASE READ CAREFULLY!
KEEP FOR FUTURE REFERENCE
Dear clients,
We are glad that you have chosen this premium product. We, the Pinolino staff,
have manufactured this item with greatest care. The materials that were used
are eco-friendly and comply with the strict European safety standards.
To spare you unnecessary effort, carefully read the assembly instructions
first. Check whether you have all the parts and study the illustrations
carefully before you start the assembly. Improper handling or assembly and
especially construction alterations will void all warranty claims.
Removable bars:
One of the bedsides has three removable bars, which can be detached. To pull
out the removable bars, first push them upwards and then take them out on a
side. Mounting is done in reverse order. To avoid impermissible opening
dimensions, all removable bars must be removed when a removable bar is
removed.
Safety requirements
Please check regularly that the screws are well tightened. The screws can
loosen, leading to snag points or objects getting caught. The mattress support
has three height positions. Please make sure that the mattress support is set
in the right position, so that the child will not fall. The lowest position is
the safest position. As soon as the child can sit up, the mattress base should
only be used in this position.
Please use only the enclosed hex key and a screwdriver for the assembly. To
avoid damaging the product, do not use an electric screwdriver for tightening
the screws!
Please note:
Use only original accessories and spare parts from the producer or from the
providers. Plastic bags and other plastic elements / wrappings should be
removed immediately and kept out of the reach of children!
Assembly instructions
Please set the parts on an even, flat surface. Make sure that the article
isn’t inclined.
We recommend using the packaging of the article as underlay in order to
protect it and its bottom side.
Warning
Do not use the cot if single parts are missing, broken or torn. Use only
original spare parts recommended by Pinolino.
To prevent the child from falling out, the cot should no longer be used if the
child is able to climb out of the cot.
Warning
Objects that can serve as footholds, or ones that present the hazard of
suffocation or strangling, e.g. laces, drapery or curtain chords etc., must
not be left inside the cot.
The mattress must be chosen so that the depth of the cot (mattress upper
surface to top edge of the bed frame) will be at least 50 cm in the lowest
position of the mattress support and at least 20 cm in its highest position.
The mattress size should be 140 cm x 70 cm, or at least 139 cm x 68 cm. The
maximum thickness of the mattress for this bed must be 10 cm.
Warning
Never use more than one mattress in the cot.
Warning
The size of mattress must ensure that the gap between the mattress and the
side ends is no more than 30 mm, however the mattress is positioned.
Warning
Make sure that the bed is not in the close proximity of open fires or strong
heat sources, e.g. electric heaters, gas stoves.
Keep the assembly plan and the hex key for future disassembly or assembly.
Maintenance
Wipe with a clean, wet cloth. Also find details on www.pinolino.de.
What else you should know
In producing our furniture and toys we only use materials, oils, varnishes and
glazes that do not pose a health hazard and are appropriate for children’s
furniture. As a result of the production process, new furniture can sometimes
retain a specific odor. To counter this harmless inconvenience we recommend
repeated venting.
WITHOUT RECONSIGNMENT OF THIS ASSEMBLY PLAN AND OF THE RECEIPT, POSSIBLE COMPLAINTS WILL NOT BE TAKEN INTO CONSIDERATION.
We wish you much joy with your Pinolino cot.
Manufactured by:
Pinolino
Kinderträume GmbH
Sprakeler Str. 397
D-48159 Münster
Fax +49-(0)251-23929-88
service@pinolino.de
www.pinolino.de