ROBUS RVUF122FT-24 Vulcan 1x12w and 2x12w IP65 LED Corrosion Proof Instructions
- June 6, 2024
- ROBUS
Table of Contents
RVUF122FT-24 Vulcan 1x12w and 2x12w IP65 LED Corrosion Proof
Instructions
PLEASE READ THE INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN THEM FOR
FUTURE REFERENCES.
! Electrical products can cause death or injury, or damage to property. If in
any doubt about the installation or use of this product, consult a competent
electrician
Note:
Product technical information and specification may change over time without
prior notification. For the latest technical information please visit our web
site www.robus.com or
robusdirect.com
-20°C < Ta < +40°C, 220-240V ~ 50/60Hz, Class I, IP65
Luminaire is non-dimmable
Suitable for mounting on a normally flammable surface.
Installation
- Ensure mains supply is switched off before commencing work.
- Select a suitable location for the luminaire.
- Safety note! The power supply cord must not be exposed to mechanical damage.
- Disassemble the fitting base from the fitting.
- Mark appropriate fixing hole positions on the ceiling and check the location of buried cables, pipes, and other building services before drilling.
- Drill holes in the ceiling and attach brackets to the ceiling.
- Note: IP gland must be used
- Feed supply cables through the gland and tighten the gland
- Attach the base to brackets
- Connect supply: Live SL– Brown, Neutral –Blue and Yellow/Green Earth.
- Refit metal plate to base and ensure it is secure
- Attach the diffuser to the base using the clips provided.
Market Surveillance: LS Code of energy efficiency Class D.
RVUF122FT-LS, RVUF242FT-LS
Disconnect driver input and output connections
Remove LED PCB
Information for the Product user:
- Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed-out wheelie bin symbol).
- Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection center for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
- This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
- The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations
The Installation must be carried out by a qualified electrician
L.E.D lighting & Electrical Distribution Group UC
IRE: Nangor Road, Dublin 12, D12 E7VP, Ireland
UK: Bracknell Enterprise & Innovation Hub, Ocean
House, 12th Floor, The Ring, Bracknell,
Berkshire RG12 1AX, UK
Tel: +353 1 7099000
Fax: +353 1 7099060
Email: info@robus.com
Website: www.robus.com