ROBUS RCT6CCT3-01 Downlight Cavan LED COB Tilt Dimmable Installation Guide
- June 6, 2024
- ROBUS
Table of Contents
CAVAN Tilt 6.5W COB CCT CHANGING LED
DOWNLIGHT, 3000K, 4000K AND 6500K, DIMMABLE,
WHITE AND BRUSHED CHROME
RCT6CCT3-01
RCT6CCT3-13
Installation Guide
PLEASE READ THE INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN THEM
FOR FUTURE REFERENCES.
! Electrical products can cause death or injury, or damage to property.
The Installation must be carried out by a qualified electrician.
Note:
The luminaire must be disconnected before carrying out any insulation
resistance testing. Product technical information and specification may change
over time without prior notification. For the latest technical information
please visit our web site www.robus.com or
robusdirect.com
-20°C <Ta< 40°C, 220V-240V ~ 50/60Hz, Class I, IP20
Dimmable with leading and trailing edge dimmers (See web site for dimmer
compatibility list) Suitable for mounting on normally flammable surface
Installation
- Ensure mains supply is switched off before commencing work or changing color temperature.
- This luminaire requires a round hole Ø76mm cut into the ceiling for correct installation.
- Before cutting, ensure that the hole does not impinge on joists, pipework, cables, or other building services.
- The default setting for the fitting:3000K, Press the switch on top of the fitting to select color temperature: 3000K, 4000K, and 6500K.
- Connect power supply cable to the terminals: Brown/Live to L, Neutral/Blue to N, and Earth/Green Yellow to E.
- Offer luminaire up to cut-out. Hold retention spring vertically against the fitting body, push fitting through the cut-out until the springs come down on the upper side of the plasterboard. Ensure that the fitting is secure and the bezel is tight against the ceiling.
WARNING: DO NOT CHANGE CCT WHEN THE FITTING IS ON!!
Market Surveillance:
LS Code of energy efficiency Class F. RCT6CCT3-LS
Use a flat head screwdriver to prise open driver housing. Remove screws and
remove the driver (SCG). Twist and remove the trim. Remove cover and lens.
Remove screws and take out LED PCB (LS).
Information for the Product user:
- Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed-out wheelie bin symbol).
- Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection center for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
- This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
- The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations
L.E.D lighting & Electrical Distribution Group UC
IRE: Nangor Road, Dublin 12, D12 E7VP, Ireland UK: Bracknell Enterprise &
Innovation Hub, Ocean
House, 12th Floor, The Ring, Bracknell,
Berkshire RG12 1AX, UK
Tel: +353 1 7099000
Fax: +353 1 7099060
Email: info@robus.com
Website: www.robus.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>