ROBUS R208PS-01 GU10 Pressed Steel Circular Downlight Instruction Manual
- June 6, 2024
- ROBUS
Table of Contents
ROBUS R208PS-01 GU10 Pressed Steel Circular Downlight
Information for the Product user
- Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed out wheelie bin symbol).
- Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
- This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
- The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations
Specifications
- Model No: R201PS – R208PS
- Supply Voltage: 220- 240V~50/60Hz – 220-240V~50/60Hz
- Lamp Type: GU10 Max.50W – GU10 Max.50W
- Ta Range: – 20°C < ta < 40°C – – 20°C < ta < 40°C
- IP Rating: IP20 – IP20
- Safety Class: Class II – Class II
- Overall Diameter: 80mm – 105mm
- Depth: 90mm – 90mm
- Cutout: 60mm – 85mm
- Weight: 0.1Kg – 0.19Kg
- Warranty: 2 year – 2 year
Installation
- Ensure mains supply is switched off
- Mark ceiling with appropriate cut-out size
- Before cutting, ensure that the hole does not impinge on joists, pipe work, cables or other building services
- Ensure there is at least 50mm of free space around and 25mm above the luminaire. Do not cover the luminaire with thermal insulation
- Connect supply cables Live and Neutral to fitting terminals (polarity is unimportant). Do Not Earth
- Fit springs and offer luminaire up to cut-out with the longer leg of each spring being held vertically. The luminaire is retained in position by the spring tension between the short and the long leg of each spring against the ceiling
- Lamp installation and replacement:Ensure mains supply is off. ! When operating the luminaire is too hot to touch. Switch off and allow to cool before undertaking any maintenance work. Remove clip to release the lamp.
Luminaires and transformer not suitable for covering with thermally insulating
material
Suitable for mounting on normally flammable surface Minimum distance from
illuminated object is 0.5 metre
The Installation must be carried out by an electrician
Installation diagram
References
- LED Group ROBUS UK & Ireland | LED Group ROBUS
- robusdirect
- ROBUS: Home to Best-in-Class LED Lighting and Customisation - Robus
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>