ROBUS 3000K Cosmic 100w Led Flood Light Installation Guide
- June 6, 2024
- ROBUS
Table of Contents
ROBUS 3000K Cosmic 100w Led Flood Light
Installation
- Ensure mains supply is switched off before commencing work.
- Select suitable location for the luminaire.
- Mark wall with appropriate fixing positions. Before drilling, ensure that the hole does not impinge on pipework, cables, or other building services.
- Attach luminaire and fix bracket by tightening screws, then adjust to the desired angle. Ensure that it is secure.
- The luminaire is supplied with 1m of rubber cable. Using suitable IP-rated enclosure terminate Brown (Live), Blue (Neutral), and Green/Yellow (Earth) to switch suppliers.
- This product has no user-serviceable parts. If any part is damaged, disconnect from mains and discontinue use.
Note: No “fixings screws provided’, please use appropriate fixing screws.
- Projection Distance: 25m – 30m
- Max Projection Area: 30m x 12m
- Mounting Height: 4m – 8m
- Market Surveillance: These products contain light sources of energy efficiency as detailed below.
- RCM10030-LS: Class E
- RCM10040-LS: Class E
- Remove screws at the back of the fitting. Open housing. Remove LED PCB (LS) and Remove driver PCB (SCG)”
INFORMATION
PLEASE READ THE INSTRUCTIONS BEFORE COMMENCING INSTALLATION AND RETAIN THEM
FOR FUTURE REFERENCES. Electrical products can cause death or injury, or
damage to property. If in any doubt about the installation or use of this
product, consult a competent electrician
Note
Product technical information and specification may change over time without
prior notification. For the latest technical information please visit our web
site www.robus.com or
robusdirect.com
-20°C < Ta < +40°C, 220-240V ~ 50/60Hz, Class I, IP65 Luminaire is non-dimmable
Information for the Product user
- Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed-out wheelie bin symbol).
- Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection center for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
- This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
- The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations
The Installation must be carried out by a qualified electrician
References
- robusdirect
- ROBUS: Home to Best-in-Class LED Lighting and Customisation - Robus
- ROBUS: Home to Best-in-Class LED Lighting and Customisation - Robus
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>