KSE-LIGHTS HL-1000-EX Hand Lamp Instruction Manual
- June 1, 2024
- KSE-LIGHTS
Table of Contents
KSE-LIGHTS HL-1000-EX Hand Lamp
Reference standards:
- EN IEC 60079-0:2018
- EN 60079-1:2014
- EN 60079-11:2012
- EN 60079-31:2014
II 2G Ex db ib IIC T6 Gb II 2D Ex ib tb IIIC T80°C Db IP68 -20 °C <Ta< +55 °C
OVERVIEW
FEATURES
CHARACTERISTICS OF PERFORMANCE
This product is widely used in high-vol-tage line inspection, search and rescue, equipment inspection, maintenance and various flammable and explosive places as mobile lighting. Zone 1 and Zone 2 for hazardous gases; Zone 21 and Zone 22 for hazardous dust.
- Three levels of strong light, weak light, and flashing warning can be switched at will;
- Dual modes can be switched free-ly. (as discribed on the following page)
- Digital battery display, real-time understanding of lighting time;
- Using ultra-high brightness LED, suitable for field patrol operations and search targets;
- The patented structure for heat dissipation can quickly reduce the temperature of the light source and effectively ensure the reliability and service life of the light source;
- The shell is made of CNC preci-sion processing, and the surface of the shell is treated with the har-dest oxidation treatment, making the whole elegant atmosphere;
- It can be equipped with a rubber protective cover to increase the resistance to fall and wear and prolong the service life of the product;
- Built-in 6pcs 18650 lithium batteries, with strong endurance, can be selected according to the use situation.
PRECAUTION
- Frequently check and ensure that the handle and the back cover, the lamp tube and the back cover are tightly integra-ted to enhance the waterproof, explosionproof, and impact resistance capabilities.
- When charging in a place with a high ambient temperature or continuously discharging with strong light for a long time, the surface of the flashlight will rise slightly in temperature, which is a normal phenomenon.
- It is strictly forbidden to place the transparent part of the lamp facing down after turning on the lamp; do not illuminate the human eye directly (becau-se the strong light may hurt the human eye).
- Lamp is not allowed to be opened or modified.
- Wipe the surface after use in a corrosive environment or seawater.
- The box includes lamps, lan-yard, charger, manual.
INSTRUCTION USAGE
- Press the grip switch to turn on the power light. Press again to switch to the work light, and once more to turn off the illumination.
- When the light is off, hold the switch for 2 seconds to activate the blinking mode. The light will then flash. Press again to turn the light off.
- When the light is turned on, the battery power will be detected. The battery power is displayed as a percentage value in the window at the end of the lamp. When the power is 10%, the lamp needs to be charged.
- After the first few times of use, the charging time is 8~10 hours. In the future, it can be recharged in time according to the normal charging time to ensure that the battery is always fully charged; after a full charge, it can be used at any time within 90 days. If the hand lamp is not used for a longer period of time, charge the battery according to the instructions before using it again.
- During use, if the power is about to run out, the brightness of the light will be significantly dimmed and enter the stroboscopic state. The power will be automatically cut off after about 10 minutes. At this time, stop using and charge in time.
- The charger has a built-in charging protection device. Open the charging rubber plug on the back cover of the lamp, and insert the charger‘s output plug into the charging socket. The red light is on to indicate that it is charging, and the red to green indicates that it is fully charged.
Ex marking:
- II 2 G Ex db ib IIC T6 Gb
- II 2 D Ex ib tb IIIC T80 Db IP68
Declaration of Conformity
- according to directive 2014/34/EU (ATEX directive)
- according to directive 2014/35/EU (LVD directive)
- according to directive 2014/30/EU (EMC directive)
Manufacturer: Zhejiang Tormin Electrical Co., Ltd.
Distributor: KSE-LIGHTS GmbH
Address: Thüngenfeld 8, 58256 Ennepetal, Germany
Product: LED hand lamp
Types: HL-1000-EX (BW7101A/B)
Description: LED hand lamp with a compact aluminium housing. The lamp
includes a light source and a rechargeable accumulator.
Marking
- II 2G Ex db ib IIC T6 Gb
- II 2D Ex ib tb IIIC T80°C Db IP68
- -20 °C ≤ Ta ≤ 55 °C
Issuer of EU-type examination certificate:
TÜV Rheinland Industrie Service GmbH, Köln Applied standards for ATEX
directive:
- EN IEC 60079-0:2018
- EN 60079-1:2014
- EN 60079-11:2012
- EN 60079-31:2014
Applied standards for LVD directive:
- EN 60598-1:2021+A11:2022
- EN 60598-2-4:2018 used in conjunction with
Applied standards for EMC directive:
- EN 55015:2019+A11:2020 EN 61000-4-3:2006+A1:2008+A2:2010
- EN 61000-3-2:2019 EN 61000-4-4:2012
- EN 61000-3-3:2013 +A1:2019 EN 61000-4-5:2014+A1:2017
- EN 61547:2009 EN 61000-4-6:2014/AC:2015
- EN 61000-4-2:2009 EN 61000-4-8:2010
- EN 61000-4-11:2004+A1:2017
KSE-LIGHTS GmbH
Ennepetal, 17.08.2023
Signature: Nikolai Seel (General management)
This declaration certifies compliance with the indicated directives but implies no assurance of properties. The safety of the product information should be observed. This statement turns off automatically whenever changes are made to the product, that have not been matched with the company KSE- LIGHTS GmbH.
- Tel: +49 (0)2333-98247 30
- Fax: +49 (0)2333-98247 49
- www.kse-lights.com
- info@kse-lights.com
USAGE CHARGER
- During use, if the power is about to run out, the brightness of the light will be significantly dimmed and enter the stroboscopic state. The power will be automatically cut off after about 10 minutes. At this time, stop using and charge in time.
- The charger has a built-in charging protection device. Open the charging rubber plug on the back cover of the lamp, and insert the charger‘s output plug into the charging socket. The red light is on to indicate that it is charging, and the red to green indicates that it is fully charged.
The production date is part of the serial number. This can be found on the handle as well as on the packaging of the lamp (ex. SN:23055506 -> May 2023).
MANUFACTURER: ZHEJIANG TORMIN ELECTRICAL CO., LTD.
ADD: No. 35, Qingjiang Road, High-tech District, Wenzhou, Zhejiang,
China. P. C: 325011
- Tel: +86 577 56966366 +86 577 56966368
- Fax: +86 577 56966166
- http://www.tormin-lighting.com
- E-mail: sales@tormin.com
- +49 (0)2333 982 47 30
- www.shop.kse-lights.com
- www.kse-lights.com
Product Specifications
- Product Name : HL-1000-EX Hand Lamp
- Manufacturer: Zhejiang Tormin Electrical Co., Ltd.
- Model: HL-1000-EX
- Reference Standards:
- EN IEC 60079-0:2018
- EN 60079-1:2014
- EN 60079-11:2012
- EN 60079-31:2014
Frequently Asked Questions (FAQ)
Q: How can I check the battery status of the lamp?
A: The lamp features a battery status display that indicates the remaining
battery power. Check the display to monitor the battery level.
Q: Where can I find the production date of the lamp?
A: The production date is part of the lamp’s serial number, which can be
found on the handle and packaging of the lamp. For example, SN:23055506
corresponds to May 2023.
References
- KSE Lights
- KSE-LIGHTS – Leuchten für maximale Sicherheit | KSE-LIGHTS
- Zhejiang Tormin Electrical Co.,Ltd.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>