nuliie NUBW01 Bottle Warmer User Manual

June 15, 2024
nuliie

nuliie NUBW01 Bottle Warmer

nuliie NUBW01 Bottle Warmer

Important Information

We appreciate you choosing one of our baby-related products. It gives us great joy to be the one who helps parents and other caregivers with their nursing concerns. The Nuliie Bottle Warmer combines the flexible functionality of steam sterilizing and food warming with a design for moderately defrosting and warming breast milk. Every component is BPA-free. so it is safe for your baby. Please carefully read the user manual before use and maintain it properly to ensure you receive the best service possible from our product.

For any questions or concerns. please email us: support@nuliie.com
We will go above and beyond to resolve any customer issue within 24 hours.

Specifications

Nulie Bottle Warmer

Model NUBW01
Max Water Volume 5.4oz/160ml
Max Heating Temperature 212°F/100°c
Power AC110V-120V 60Hz (US/CA)

AC220V-240V 50Hz (UK/EU)
Rated Power| 400W
Warranty| 12 Months

WARNING

  1. This product is for household use only.
  2. Before you plug in the device, check the voltage to make sure it matches the local voltage.
  3. Do not immerse the cord, plug, or appliance in water or other liquid.
  4. Do not place the appliance on or near a hot gas or electric cooker or in a heated oven.
  5. Do not move the appliance when it contains hot water.
  6. Make sure you add water before switching on the bottle warmer.
  7. This appliance can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
  8. Keep the warmer out of the reach of your children.
  9. Keep your babies and children away when the warmer is working in case of a scalding accident.
  10. When you’re using the warmer, be sure to keep it stable and unfold the power cord completely.
  11. Let the appliance cool down before you clean it.
  12. Do not use a chemical stain remover to clean any part of the warmer.
  13. Do not spill water on the power plug.
  14. Do not try to open or repair the appliance yourself.
  15. To help prevent overheating, the device will turn off if it gets too dry. You must wait for the heater to cool down, which should take about 10 minutes. or add cold water to the bottom to restart the unit.

Parts Guide

Parts Guide

Control Panel Instructions

Function Instructions

  1. The indicator light will blink. And you’ll hear a “BEEP” when the device first tums on.
  2. The on/off button is flashing in standby mode. Please press the on/off button to restart
  3. There is a memory feature on this appliance. The last-used setting is retained for your subsequent use.

Digital Screen Display
Shows water temperature and remaining time.

Function Button
Select from 4 functions.
Function Icon
“V ” and “A” Button

Adjust the temperature or time of the currently selected function
Control Panel Instructions
Function Button
Select from 4 functions.
ON/OFF Button

Switch the device on/ off or cancel the ongoing operation.

User Guide

Operating in fast warming mode
  1. Add 1.4 oz (40 ml) of distilled water before closing the bottle.
  2. Click ‘ ‘ and select “Fast”.
  3. Press the ”∧” and ”V” keys. select the time, then the light flashes twice and starts working. The screen will begin counting down automatically after a “beep”.
  4. When the heating is finished, the device will beep five times. It means you should remove the bottle quickly.
  5. To ensure the milk is at the proper temperature, shake it vigorously before feeding.
How to use Fast mode
  1. Add 40ml Water
    How to use Fast mode

  2. Put the Basket, Bottle and Lid
    How to use Fast mode

  3. Select Fast Function
    How to use Fast mode

  4. Adjust Time
    How to use Fast mode

  5. Beep When Done
    How to use Fast mode

  6. Shake Well and Test
    How to use Fast mode

Warming Time Guidelines

When heating milk. the milk volume. the bottle’s material. and its initial temperature affect how quickly it heats up-for example. ambient temperature (68°F/20°C) or refrigerator temperature (41°F/5°C). Please use the table below to determine the appropriate heating period.

Glass bottle 60ml 2oz 120ml 4oz 180ml 6oz 240ml 8oz 280ml 9.5oz
Refrigerator(41°F/5°C) 2 3.5 4.5 5.5 6
Room temperature (68°F/20°C) 1.5 25 3 3.5 4
Plastic bottle 60ml 120ml 180ml 240ml 280ml
Refrigerator (41°F/5°CJ 3.5 5 6 7 7.5
Room temperature (68°F/20°C) 2.5 3.5 4.5 5 5

Precautions:

  1. A constant heating temperature of 37°C is displayed on the screen.
  2. Please warm the milk for 0.5-1 minute if it is too cold.
  3. Immediately remove the bottle to avoid overheating. You risk losing vital vitamins and nutrients if you overheat the breast milk.
  4. Always check the temperature before feeding your baby.

24-hour constant temperature/thawing operation:

  1. The bottle should be sealed before adding 5. 4 oz (160 ml) of distilled water.
  2. Press the “Function Icon” button to choose the “24H” function.
  3. Press the “∧” and ”V” keys to choose the desired temperature [optional range: 94 to 140°F (35-60°C)). and the light will flash twice and start working automatically after a “beep”.
  4. The bottle has achieved the desired temperature and is starting to enter the heat preservation condition as the “24H” indicator light flashes. The maximum period for keeping warm is 24 hours. The thermos cup enters standby mode after five beeps. which signals the countdown’s conclusion.

Precautions:

The “water bath heating” technique is used in this mode. The temperature shown on the screen. as opposed to the temperature in the bottle, reflects the water’s actual temperature in real-time. During the heating process. the temperature displayed on the screen will climb above the selected temperature and then gradually fall back to itto raise the temperature in the bottle to the required level.

How to use 24H/thawing mode

  1. Add 160ml Water
    How to use 24H/thawing mode

  2. Put the Basket, Bottle and Lid
    How to use 24H/thawing mode

  3. Select 24H Function
    How to use 24H/thawing mode

  4. Adjust Temperature
    How to use 24H/thawing mode

  5. Start Working after a Beep
    How to use 24H/thawing mode

  6. Beep When Done
    How to use 24H/thawing mode

Operating in food warming mode

  1. The bottle should be sealed before adding 5.4 oz (160 ml) of distilled water.
  2. Press the “Function Icon” button to choose the “Food” function.
  3. Press the “∧” and ”V” keys to select the desired temperature (86 to 176°F (30-80°C] optional], and the gadget will flash twice and start working automatically after a “beep”.
  4. When the “Food” light starts to flash, the milk has reached the desired temperature and started entering the heat preservation phase. The maximum amount of time for heat preservation is two hours. Five beeps indicate the end of the heat preservation process before the thermos cup enters standby mode.

Precautions:

  1. The “water bath heating” technique is used in this mode. The temperature of the water is shown on the screen in real-time. During the heating process. the temperature displayed on the screen will increase over the set temperature and then gradually fall back to the set temperature to raise the temperature in the bottle to the required level.
  2. To help the food heat more quickly and evenly, stir the baby food frequently while cooking. Be careful not to bum your fingers when stirring.
  3. It takes roughly an hour to reheat baby food from room temperature and around two hours to thaw frozen purees.

How to use Food mode

  1. Add 160ml Water

  2. Put the Basket. Bottle and Lid

  3. Select Food Function

  4. Adjust Temperature

  5. Beep When Done

  6. Stir Well and Test

Operation for disinfection

  1. Add 1.4 oz (40 ml) of distilled water before closing the top lid.

  2. When the “ ” button is pressed and the “steam” function is chosen. the indicator light flashes twice
    and a “beep” is heard. At this point the work process. and the countdown timer both begin.

  3. There will be five beeps, and the thermos cup will go into standby mode after 10 minutes or when the
    water boils dry.

Precautions:

  1. The screen’s default temperature and hold time are both 100″C/212″F, thus there is no need to make a modification.
  2. While taking the product out of the sterilizer after usage, please take caution to avoid burning your fingers.

How to use steam mode

  1. Add 40 ml Water
    How to use steam mode

  2. Put the Basket Bottle and Lid
    How to use steam mode

  3. Select Steam Function
    How to use steam mode

  4. Beep When Done
    How to use steam mode

Cleaning and Maintenance

Cleaning

  1. Unplug the bottle warmer and ensure it cools down before cleaning.
  2. Remove the top cover from the main body and wipe the surface with a moist soft cloth.
  3. Refrain from immersing the working base for cleaning purposes.
  4. It is recommended to use distilled water to prevent scale. Acetic acid or other descalers can help you clean the scale efficiently.

Descaling

We recommend you descale the bottle warmer every four weeks to ensure it continues to work efficiently. You can refer to the following steps:

  1. Mix 1.4 oz/40 ml purified water with 0.7 oz/20 ml vinegar and pour the mixture into the warmer base.
  2. Turn on the bottle warmer and select the “Fast” mode.
  3. When boiling the mixture. please turn it off and unplug it.
  4. Leave the mixture in the warmer for 30 minutes until all scale has dissolved.
  5. Empty the warmer. wash its inside thoroughly. and wipe with a dry and clean cloth.

Note

  1. Never dry out while using the bottle warmer.
  2. Please use the descaler provided and avoid using other brands.

Troubleshooting

Question Cause Analysis Solution
Too hot Inappropriate time for heating in fast heating mode. Please refer to

the manual or the heating time reference table prompted by the machine label to select the appropriate heating time.
Not taken out in time after fast heating.| Take out the bottle in time.
Too cold| Inappropriate time for heating in fast heating mode.| Reheat for 0.5 sec -1 min.
Room temperature is too cold.
The bottle is too thick.
Not taken out in time after fast heating.| Take out the bottle in time.
The bottom of the bottle warmer is clogged with scale, affecting its heating effect.| Descale the milk warmer every four weeks.
Not working| If the screen is blank and the indicator light on the on/off button is flashing, the bottle warmer has shut down and is no longer operational.| The screen will light up and start working when you click the on/off button again.
The bottom reset switch will cut off power to the device if it is dry to prevent overheating.| To restart the device, you must wait for the heater to cool down (approximately 10 minutes) or add cold water in it. Then press the on/off button again.
A lot of dirt has accumulated in the bottom of the bottle.| Descale the milk warmer every four weeks.
If the above problem still needs to be solved or there are other concerns, please email support@nuliie.comor contact us via our 24/7 live chat.

 Customers Support


Scan me for videos and FAQs

If you have any questions or concerns. visit www.nullle.com for our 24/7 live chat or email us at support@nuliie.com.


Symbols

Manufacturer:
TEAM YTD CO., LIMITED

Address:
11018, 11/F., LIPPO SUN PLAZA, 28 CANTON ROAD, TSIM SHA TSUI, KOWLOON, HONG KONG

Customer Service:
If you have any questions about Nuliie product.
please contact us via support@nuliie.com

CET PRODUCT SERVICE LTD.
Beacon House Stokenchurch Business Park,
Emall: info.cetservice@gmail.com
Phone: +447419325266

UAB Qixiang Europe
Pranciskonu g. 6-46, LT-01133 Vilnius, Lithuania
Technical Information Center
Trakehner Str. 7-9, 60487 Frankfurt am Main. Germany
Emall: qixiang.europe@gmail.com
Phone: +496976895074

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals