Fisher-Price DJD09 Crawl Around Car Instruction Manual

August 3, 2024
fisher-price

Fisher-Price DJD09 Crawl Around Car

Keep this instruction sheet for future reference, as it contains important information. Requires three AA (LR6) alkaline batteries (not included) for operation. Adult assembly is required.

Tool required: Phillips screwdriver (not included). Wipe this toy with a clean, damp cloth. Do not immerse. This toy has no consumer-serviceable parts. Do not take it apart. The actual product may appear different from the photos shown.

fisher-price.com

Consumer Information

CONSUMER ASSISTANCE

Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.

Hearing-impaired consumers: 1-800-382-7470.

Outside the United States:

  • Canada: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com.
  • Great Britain: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB.
  • Helpline: 01628 500303. www.service.mattel.com/uk Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
  • Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
  • New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.

CAN ICES-3 (B)/NMB-3 (B)

Operation is subject to the following two conditions:

  1. this device may not cause interference, and
  2. this device must accept any interference, including interference that may cause undesired operation of the device.

FCC STATEMENT

(UNITED STATES ONLY)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Consult the dealer or an experienced radio/TV technician for help.

NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Assembled Parts

  • 2 Rear Fenders
  • Rear Wheel Base
  • Windshield
  • Side Base
  • Side Panel (outside)
  • Dash Trunk
  • Side Panel (inside)
  • Seat Back
  • Door
    • Part not shown: Label Sheet
  • Front End

CAUTION This package contains small parts. For adult assembly only.

8 x ¾” (1,9 cm) Screw – 21

SHOWN ACTUAL SIZE Tighten all screws with a Phillips screwdriver. Do not over-tighten.

Assembly

  • Fit the rear fenders onto the rear wheelbase. Push to “snap” each rear fender in place.
    Hint: Each rear fender is designed to fit one way. If it does not seem to fit, try the other rear fender.

  • Fit the trunk into the slots in the rear wheelbase. Push to “snap” into place.

  • Fit the tabs on the seat back into the slots in the trunk.

  • Insert two screws into the seat back and tighten.

  • Fit the side panels onto the front and rear ends.

  • Insert nine screws into the side panel and tighten.

  • Carefully turn the car assembly over.

  • Fit the side base to the front and rear end of the car assembly.

  • Insert six screws into the side base and tighten.

  • Turn the car assembly upright.

  • Fit the peg on the door into the hole in the car. Push to “snap” in place.
    IMPORTANT! Apply labels 7 and 8 to the windshield before completing the next step.

  • Apply labels exactly as shown in the illustration. Avoid repositioning a label after it has been applied.

  • Fit the windshield onto the dash and push to “snap” in place.

  • Fit the windshield on the dash into the slot in the front end.

  • Carefully turn the car assembly over.

  • Insert four screws into the front end and tighten.

Decoration

Apply labels exactly as shown in the illustrations. Avoid repositioning a label after it has been applied.

FRONT VIEW

Battery Installation

  • For longer life, use alkaline batteries.
  • Locate the battery compartment on the dashboard. Loosen the screw in the battery compartment door and remove the door.
  • Insert three AA (LR6) alkaline batteries.
  • Replace the battery compartment door and tighten the screw.
  • If this toy begins to operate erratically, you may need to reset the electronics. Slide the power/volume switch off and back on.
  • When sounds/lights become faint or stop, it’s time for an adult to change the batteries.
  • Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities.

Battery Safety Information

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

  • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
  • Insert batteries as indicated inside the battery compartment.
  • Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak.
  • Never short-circuit the battery terminals.
  • Use only batteries of the same or equivalent type, as recommended.
  • Do not charge non-rechargeable batteries.
  • Remove rechargeable batteries from the product before charging.
  • If removable, rechargeable batteries are used, they are only to be charged under adult supervision.

3 modes of play with fun sounds and lights!

  • Slide the power/volume switch to ON with low volume , ON with high volume , or OFF .
  • Slide the Smart Stages™ mode switch to:
    • Level 1 Explore – learn first words and sounds
    • Level 2 Encourage – hear fun prompts and rewards for baby’s actions
    • Level 3 Pretend – older babies imitate and imagine with role-play fun

FREQUENTLY ASKED QUESTIONS

What is the Fisher-Price DJD09 Crawl Around Car?

The Fisher-Price DJD09 Crawl Around Car is a toy designed for toddlers, allowing them to sit and crawl around in it. It features interactive elements to engage young children in play and promote motor skills development.

What are the dimensions of the Fisher-Price DJD09 Crawl Around Car?

The Fisher-Price DJD09 Crawl Around Car measures 28.7 x 18.8 x 12.5 inches, making it a compact and appropriately sized toy for toddlers to use indoors.

How much does the Fisher-Price DJD09 Crawl Around Car weigh?

The Fisher-Price DJD09 Crawl Around Car weighs 11 pounds, which is lightweight enough for toddlers to move around and maneuver.

What is the recommended age range for the Fisher-Price DJD09 Crawl Around Car?

The Fisher-Price DJD09 Crawl Around Car is recommended for children aged 6 months to 3 years. This age range ensures that the toy is suitable for developmental milestones during early childhood.

What type of batteries does the Fisher-Price DJD09 Crawl Around Car require?

The Fisher-Price DJD09 Crawl Around Car requires 3 AA batteries. These batteries power the toy's interactive features, such as lights and sounds.

What is the price of the Fisher-Price DJD09 Crawl Around Car?

The Fisher-Price DJD09 Crawl Around Car is priced at $69.99. This price reflects the quality and interactive features provided by the Fisher-Price brand.

What interactive features are included in the Fisher-Price DJD09 Crawl Around Car?

The Fisher-Price DJD09 Crawl Around Car includes lights and sounds that activate during play, providing sensory stimulation and enhancing the interactive experience for toddlers.

How is the Fisher-Price DJD09 Crawl Around Car assembled?

The Fisher-Price DJD09 Crawl Around Car typically requires some assembly. Follow the provided instructions to attach the wheels and other parts to ensure the toy is safe and functional.

What materials are used in the Fisher-Price DJD09 Crawl Around Car?

The Fisher-Price DJD09 Crawl Around Car is made from durable plastic materials that are easy to clean and maintain. These materials are designed to withstand the wear and tear of active play.

How do I clean the Fisher-Price DJD09 Crawl Around Car?

To clean the Fisher-Price DJD09 Crawl Around Car, wipe down the surfaces with a damp cloth and mild soap. Avoid submerging the toy in water and ensure it is dry before use.

Why are the lights on my Fisher-Price DJD09 Crawl Around Car not working?

Check if the batteries are properly installed and have enough charge. Replace old batteries with new ones if necessary.

What should I do if the sounds on my Fisher-Price DJD09 Crawl Around Car are not functioning?

Ensure the volume is turned up and that the batteries are not depleted. If the issue persists, try resetting the toy by turning it off and then on again.

How can I fix a stuck steering wheel on my Fisher-Price DJD09 Crawl Around Car?

Gently rotate the steering wheel back and forth to dislodge any obstruction. If the problem continues, inspect for any visible debris or damage.

What if my Fisher-Price DJD09 Crawl Around Car does not respond to button presses?

Verify that the batteries are installed correctly and are not drained. If the problem persists, check for any dirt or debris that might be obstructing the buttons.

How can I resolve a non-functioning gear shifter on the Fisher-Price DJD09 Crawl Around Car?

Inspect the gear shifter for any blockages or visible damage. Gently move it back and forth to see if it loosens up. Ensure the car is placed on a flat surface.

DOWNLOAD THE PDF LINK:Fisher-Price DJD09 Crawl Around Car Instruction Manual

REFERENCES

Fisher-Price DJD09 Crawl Around Car Instruction Manual- Device.Report

Fisher-Price DJD09 Crawl Around Car Instruction Manual- wiki

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

fisher-price User Manuals

Related Manuals