KSE-LIGHTS LED MAMBA Room Lamp User Manual

KSE-LIGHTS LED MAMBA Room Lamp User Manual

SAFETY INSTRUCTIONS

• Do not cover this product as the covering may cause the flexible light to overheat, melt, or ignite.
• Do not operate the flexible light while it is tightly coiled. To prevent overheating do not allow contact between flexible light cables and parts of light cables. Maintain at least 12 mm spacing between flexible light  cables or parts of light cables.
• Do not puncture, cut, shorten, or splice the flexible lighting.
• Do not route the cord or flexible lighting through walls, doors, windows, or any like part of the building structure.
• Do not use if there is any damage to the light or cord insulation. Inspect periodically.
• Do not submerge flexible light in liquids or use the product in the vicinity of standing water or other liquids.
• Do not install in cabinets, tanks or enclosures of any kind.
• Do not subject flexible lighting to continuous flexing.
• DO NOT EXCEED THE MAXIMUM NUMBER OF EXTENSIONS OR FLEXIBLE LIGHT LENGTHS PERMITTED BY THE MARKING.
• Do not secure this product or its cord with staples, nails or like means that may damage the insulation or permanently attach to the building structure.
• Follow instructions carefully when splicing flexible light sections or attaching power cords. Ensure that all connections, including the end cap on the last segment are properly installed with dielectric grease and  shrink tube to preclude the entrance of water (outdoor applications).
• Do not subject flexible lighting to continuous flexing.
• The product may not be used in explosive atmospheres.

• ---

WARNING

• These products may represent a possible shock or fire hazard if improperly installed or attached in any way. Products should be installed in accordance with these instructions, current electrical codes, and/or  the current National Electric Code (NEC).
  To reduce the risk of fire, electric shock or injury to persons, make sure that the electrical power to the fixture is disconnected at the source prior to installation or any servicing.

PROPER DISPOSAL (EU ONLY)

• Never place any electric tools in your household refuse. To comply with European Directive 2012/19/EU concerning old electric and electronic equipment and its implementation in national laws, old electric  tools must be separated from other waste and disposed of in an environment friendly fashion, e.g., by taking to a recycling depot. Recycling alternative to the demand to return electrical devices: As an  alternative to returning the electrical device, the owner is obliged to cooperate in ensuring that the device is properly recycled if ownership is relinquished. This can also be done by handing over the used device  to a returns center, which will dispose of it in accordance with national commercial and industrial waste management legislation. This does not apply to the accessories and auxiliary equipment without any  electrical components which are inclu ded with the used device.

EXPANDABLE UP TO 75M

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>