Bissell SPINWAVE Robot Series 3859, 3115 User Manual

: June 7, 2024
: Bissell

Table of Contents

What’s in the Box?
Connecting to the App
Mop Mode
Dry Vacuum Mode
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SPINWAVE® ROBOT
QUICK TIPS
SERIES 2859, 3115

Bissell SPINWAVE Robot Series - 1

What’s in the Box?

Standard accessories may vary by model.

Bissell SPINWAVE Robot Series - What’s in the Box

Connecting to the App

For more help, visitsupport.BISSELL.com.

Downloading the BISSELL Connect App means you can change your robot’s cleaning mode, start, pause, or stop your robot, schedule cleanings, view notifications, track your cleaning history, and troubleshoot all from the palm of your hand.

Bissell SPINWAVE Robot Series - App or Google | |
---|---|---
1. In the App or Google Play Store search “BISSELL Connect” and download.
Once downloaded, open the app and sign in or create a new login.| 2. Make sure you’re near your WiFi router before turning the robot ON (I).| 3. To put the robot in pairing mode, press and hold the Start/Pause Button for 5 seconds until you hear an ingle beep.
Bissell SPINWAVE Robot Series - From the app, selec | |
4. From the app, select “Have a BISSELL Connected Product?
Connect it now.” Then choose your product from the menu.| 5. Remove the Dirt Bin and turn the robot over to access the setup QR code.| 6. Scan the QR code, follow the instructions in the app to pair.

Mop Mode

More of a video person? Open up the BISSELL Connect App for how-to videos.

Choosing Your Formula
Keep plenty of BISSELL® formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL formulas in your machine. Other formulas may harm the machine and void the warranty. Do not use Hard Floor Sanitize Formula on area rugs or carpet.

| | |
---|---|---|---
Multi-Surface Formula
Great for cleaning all sealed hard floors.| Wood Floor Formula
| Restores your wood floors’ natural shine.| Pet Multi-Surface with Febreze Formula
Removes pet odors to clean and refresh.| Hard Floor Sanitize
Cleans and sanitizes, eliminates 99.9% of bacteria.*

Certain trademarks are used under license from The Procter & Gamble Company or its affiliates.
*Kills 99.9% of Enterobacter aerogenes (ATCC 13408) and Staphylococcus aureus (ATCC 6538)

Filling Your Mop Tank
In Mop Mode, your robot will clean using dual rear rotating mop pads combined with a BISSELL formula to clean your home’s hard floors. While mopping, your robot will also sweep and collect a limited amount of dry debris for a complete cleaning experience.

Bissell SPINWAVE Robot Series - Power Switch OFF | | Bissell
SPINWAVE Robot Series - with hot tap wate
---|---|---
1. Turn the Power Switch OFF.
Press the button on top of the tank and pull to remove.| 2. Twist to unlock the tank cap and pull up to remove.| 3. Fill tank with hot tap water (140° F/60° C MAX) to the
water fill line. Do not boil or microwave water.
Bissell SPINWAVE Robot Series - BISSELL formula | |
4. Fill with a BISSELL formula to the “Formula” fill line.| 5. Twist the Mop Tank cap back into place.| 6. Reinstall the tank.
Note: Hold the tank level to avoid leaking.

WARNING To reduce the risk of fire due to internal component damage use only BISSELL cleaning products intended for use with this appliance.

Sanitizing with Spot Mode
Spot mode can be used with BISSELL Hard Floor Sanitize Formula to sanitize floors after tough messes, like a pet accident. Spot mode also works to give certain areas extra cleaning attention when used with BISSELL Multi-Surface or Hard Floor Formulas. Access “Spot” mode in the BISSELL Connect App.
Note: You can sanitize 3 or 4 different areas around your home with a single tank.

Bissell SPINWAVE Robot Series - Add BISSELL | |
---|---|---
1. Add BISSELL Hard Floor Sanitize formula following the steps on page 5.| 2. Wipe up the mess with a disposable towel.| 3. Place the robot in the center of the area you want to clean.
| Bissell
SPINWAVE Robot Series covering |
4. To start cleaning, press the Start/Pause button 3 times or select “Spot” mode in the BISSELL Connect App.| 5. The robot will clean in a spiral pattern, covering an area of approximately 40” x 40” (1m x 1m) for about 5 minutes.
The robot will beep to let you know it’s finished.| 6. Use caution when removing the robot as the floor may be slippery. Allow remaining wet for 5 minutes.

Manual Cleaning

| Bissell SPINWAVE Robot Series - avoid most soft |
---|---|---
1. Turn the robot ON. Press the Start/Pause Button to start cleaning. Note: When finished, the robot will return to where it started. To have the robot return to the dock, start the cleaning cycle while robot is on the dock.| 2. The robot will clean hard surfaces and avoid most soft surfaces, such as area rugs andcarpet. Note: The robot will stop if water is low. To resume cleaning, refill Mop Tank and push the Start/Pause Button.| 3. Return the robot to the dock.
Press the Start/Pause Button twice. The light ring will flash white as it finds its way back.

Maintaining the Mop Pads and Debris Trap
While in Mop Mode, your robot can sweep up a limited amount of dry debris, so be sure to empty the trap after each clean.

Bissell SPINWAVE Robot Series - Turn the Power Switch | |
---|---|---
1. Turn the Power Switch OFF.
Press the button on top of the Mop Tank and pull to remove.
Place tank upside down on a soft surface.| 2. Firmly pull up on the Mop Pads to remove from mop pad drivers. Replace Mop Pads if damaged.| 3. Machine wash separately in warm water. Use only liquid detergents. Do not use bleach or fabric softener. Tumble dry on low. Do not iron or dry clean.
Bissell SPINWAVE Robot Series - align with | |
4. To reattach, use the middle hole on the pads to align with the driver.| 5. The debris trap is located on the back of the tank. Pull down the door and tip tank to empty debris.|

Dry Vacuum Mode

For more help, visitsupport.BISSELL.com.

Manual Cleaning
In Dry Vacuum Mode, your robot will clean using a combination of dual Edge- Cleaning Brushes, a rotating brush roll and powerful suction to clean multiple floor types in your home.

| | Bissell SPINWAVE Robot Series - Return the robot2
---|---|---
1. Turn the robot ON. Press the Start/Pause Button to start cleaning.| 2. When finished, press the Start/Pause Button again to stop the robot.| 3. Return the robot to the dock.
Press the Start/Pause Button twice. The light ring will flash white as it finds its way back.

Spot Mode

Bissell SPINWAVE Robot Series - robot in the center | |
---|---|---
1. Place the robot in the center of the area you want to clean.| 2. To start cleaning, press the Start/Pause button 3 times or select “Spot” mode in the BISSELL Connect App.| 3. The robot will clean in a spiral pattern, covering an rea approximately 40” x 40” (1m x 1m) for about 5 minutes. The robot will beep to let you know it’s finished.

Maintaining the Dirt Bin

Bissell SPINWAVE Robot Series - Power Switch | |
---|---|---
1. Turn the Power Switch OFFPress the button on top of the
Dirt Bin and pull to remove.| 2. Open filter door by pulling both sides apart. Empty the debris from the Dirt Bin.| 3. Remove the filter cover, then the foam and pleated filters.
Bissell SPINWAVE Robot Series - the Cleaning T | |
4. Use the Cleaning Tool to brush the filter cover and filters . Do not wash the filters.| 5. With filters removed, rinse the Dirt Bin with tap water. Ensure Dirt Bin is completely dry before reinstalling . Do not machine wash the Dirt Bin.| 6. Once clean, reinstall the filters and filter cover, close and push back into the machine.